Manual

ADDITIONAL SWITCHING SYSTEM
®
| 19
UNISWITCH
Front Panel Features & Benets
Involved with music for television, film scoring or broadcast sound? Undoubtedly you own as many video sources as
audio. The Uniswitch provides instantaneous switching between multiple video sources, all controlled from the versatile
Dangerous Remote. The Uniswitch controls any Gefen 4x1 switcher equipped with the RS232 input connector. In fact,
the techs at Dangerous Music can customize the Uniswitch to control ANY RS232 device. From Studer Tape Machines
to Routers to Lighting... Video and audio elegance from Dangerous Music.
[The Dangerous Music Uniswitch front panel pictured above]
1. Video Selected Input LEDs
Feature: Visual confirmation that a specific video source has been selected by the Monitor ST Remote.
Yellow LED on = source selected. Yellow LED off = source not selected.
Benefit: Avoid putting post-its on all your gear to remember the combinations-- what? I already forgot.
Operation: The input source is selected from the Monitor ST Remote using the “Additional Switching”
buttons. See remote section for more specifics.
Tip: , The Uniswitch input LED’s will track with the Gefen’s input indicator LED’s.
2. Bank LED Input Indicators
Feature: Visual confirmation of which bus the module is occupying.
Benefit: Instantly determine which module is being controlled from the Monitor ST remote.
Operation: On the Monitor ST Remote, first use the “UP” and “DOWN” buttons to select the appropriate
bank. The Remote’s LEDs will verify which bank is active. Then choose the input by using the
1
2