Manual

ADDITIONAL SWITCHING SYSTEM
®
| 5
REMOTE CONTROL
All Additional Switching Modules are controlled by the Dangerous ST Remote.
[Half of the Monitor ST Remote pictured above]
On the Monitor ST Remote, first use the “UP” and “DOWN” buttons to select the appropriate bank.
The Remote’s LEDs will verify which bank is active.
Then choose the input by using the “Additional Switching” 1-4 buttons.
This is how the Additional Switching remote buttons can control up to 4 devices.
See the following photo op for visual alacrity.
Tip:, If you only have one Additional Switching System®, only banks 1-2 will be selectable.
Tip:, For the DAC-ST operation, ensure that the input is set to stereo and not 5.1.