User's Manual
2 | DANGEROUS MUSIC
[rear panel power section pictured above]
2. POWER CABLE AND FUSE
Feature: Utilizes a standard 3 pin IEC power cable.
Benefit: Easy to replace if lost.
Feature: Switching power supply auto detects voltage, but you must use the correct fuse value.
Benefit: Travel with your favorite gear anywhere in the world while spreading the audio gospel.
Operation: Unit ships with voltage appropriate fuse value. To change it, use a screwdriver to gently pry the mains inlet module’s
cover open and insert the correct voltage. Fuses for the alternate voltage are included in the shipping box.
Tip: , The power switch is on the inlet module. Seat the AC cable completely and use properly grounded power mains for safe
and quiet operation.
Tip: , If the BAX will not power on and the power is known to be good, check the fuses under the inlet module’s cover.
Use 2 amp Slo-Blo for 90-120V (Americas) and 1 amp Slo-Blo for 200-240V (Europe). Switching fuses will not void
your warranty.
Bax EQ: Front Panel Features & Benets
1. LOW FREQUENCY CUT FILTERS
[low frequency cut knob pictured above]
Feature: Infrasonic rumble reduction.
Benefit: infrasonic rumble is a PC term for the omnipresent low frequency garbage that loiters unnoticed in the audio shadows.
This headroom consuming thief propagates from HVAC units, jets, subways and yes, Rayleigh Waves (i.e. earthquakes and