Owner's manual

LIAISON | 3
3. INSERTS: INPUTS & OUTPUTS
[rear panel insert section pictured above]
Feature: Connect outboard equipment here (i.e. compressor, limiter, eq, reverb...)
Benefit: Individually selectable via the front panel of the unit (more to follow on this).
Feature: Separate send and return cables, each on XLR.
Benefit: Standard issue, readily available cables.!
Tip: , The ability to loop multiple pieces of gear on a single insert if desired (i.e. comp and limiter back to back).
4. BUSS A & B: INPUTS & OUTPUTS
[rear panel buss section pictured above]
Feature: Individual access in and out to both buss a & buss b
Benefit: Leverage all your outboard gear twice, on two discrete buss paths. For example, take the output of your favorite mic
preamp and send it to buss a. Then send the signal into your session. Meanwhile, connect the output of your mix to
buss b. Now all of your gear is accessible all the time for tracking, mixing and mastering.
Tip: ,: Take the output of of buss a and connect it to the input of buss b to make one contiguous chain. This will allow
outboard that is connected later, to appear earlier. For example... the BAX EQ is in insert 1 and the Variable Mu™