Manual

Specifications
Frequency response ……………………….. 1Hz – 100 kHz within 0.2dB
THD+Noise
……………………………….. 0.003%
IMD60 4:1 ………………………………… 0.002%
Interchannel crosstalk …………………….. -113dB
Dynamic range …………………………… 119dB
Maximum level …………………………… +27dBu
Nominal operating level …………………... +4dBu
Power consumption ……………………….. 50 watts
Warranty …………………………………...
Connector Pinouts
All of the 3 pin XLR’s are wired to the standard convention (one of several, really).
Pin 1 shield
Pin 2 + signal
Pin 3 - signal
The “A-MTR” jack is a male 6 pin XLR. A breakout cable is provided with the unit
but one can roll one’s own with the following pinout.
Pin 1 Left shield
Pin 2 Left +
Pin 3 Left –
Pin 4 Right shield
Pin 5 Right +
Pin 6 Right –
Solder Pin 6 first when terminating the cable. The cup is easy to get to until the other wires get in the way.
Th
e writer still occasionally ma
kes that mistake.
The ‘D’-sub connector is used for access to the Dim function
by the Dangerous MQ.
Pin# function
1 Dim (for connection to MQ)
14 Relay common
USA Europe
Dangerous Music, Inc. Dangerous Music, Inc.
231 Stevens Road Stieleichenweg 55
Edmeston, NY 13335 50999 Köln
Tel: [phone]
Email: info@dangerousmu
sic.com
E-mail: [e-mail]
-11-
Free 2 year extended warranty with online registration.
Standard warranty: 90 days parts and labor, subject to inspection.
Does not include damage incurred through abusive operation or
modifications/attempted repair by unauthorized technicians.