Owner manual

[Fig. 3]
7. When the Control Panel opens up, set the ASIO Buffer Size to a conservative setting, like 2048
samples (Fig. 4). Later, after the system is working, experiment with lowering this to reduce latency;
however, you won’t be able to get it as low as with an ASIO-only setup. Then, click on the wrench icon
to open Advanced Options.
[Fig. 4]
8. Expand all device trees (Fig. 5) to reveal your Kontrol S2 devices as well as the sound card’s audio
devices (the High Definition Audio Device name for the Windows internal sound card may be
different, but is the most common designation). Click the “power” button for the High Definition
Audio Speaker and Headphone devices to turn them on; if only one is present, just choose that option.
Also click the Traktor Kontrol S2 Master Output in the Kontrol S2 tree, but not the Kontrol S2’s
Monitor Output or its master tree button. Finally, select CEntrance USB audio. The buttons you
selected should be green.