Operation Manual

Manual

IQ..Q744

Danish Design

Use of the chronograph:

• Press button “A” ; the chronograph will start.

• Press button “A” again; the chronograph stops.

• To reset, press button “B”.

• Intermediate times can be read by pressing button “B” once while the

chronograph is running. Press button “B” again to return to the total counted time.

Setting the time:

• Pull out the crown completely; By turning the crown the time can be set.

• By pulling out the crown just one step, the date can be set.

Aligning the chronograph:

After a battery-change for instance it’s possible that the seconds-counter isn’t on the

“0” position. To adjust this,

• Pull out the crown completely;

• Press button “A”. The 1/10

seconds' counter will move. Keep pressing it till the

counter reaches “0”.

• Press button “B” to simultaneously set the seconds- and minutes counter. Once

they're both on the “60” position, push the crown back to it's original position.

Explanation of dials and counters:

• Top : the 1/10

seconds counter

• Left : Minutes counter

• Bottom : the seconds-counter

• The central hand is the seconds-hand

Cal. VD 57

PAGE 1
Manual IQ..Q744 Danish Design Use of the chronograph: • • • • Press button “A” ; the chronograph will start. Press button “A” again; the chronograph stops. To reset, press button “B”. Intermediate times can be read by pressing button “B” once while the chronograph is running. Press button “B” again to return to the total counted time. Setting the time: • • Pull out the crown completely; By turning the crown the time can be set. By pulling out the crown just one step, the date can be set.