Operation Manual

IQ68Q885 VD 53B
A
B
Use of the chronograph:
Press button A ; the chronograph starts running.
Press button A again; the chronograph will stop.
To reset, press button B.
Setting the time:
Pull out the crown completely;
By turning the crown the time can be set.
By pulling out the crown just one step, the date can be set.
Aligning the chronograph:
After a battery-change for instance it’s possible that the seconds-counter
isn’t on the “0” position.
This can be helped by:
Pulling out the crown completely;
Press button A. Keep pressing it till the seconds-counter reaches “0”.
Explanation of dials and counters:
Left : the minute-counter
Right : 24-hour hand
Under : the seconds-counter