Flowlight Booster Pump Instruction Manual

18
FACTORY REPAIRS
WHEN CALLING FACTORY OR DEALER FOR HELP,
PLEASE tell us your MODEL and SERIAL NUMBERS !
Most failures involve the pump head, not the motor. This is the brass part that the pipes
connect to. The pump head may be replaced with simple hand tools (a 7/16” wrench and a 1/8”
Allen wrench/hex key).
YOUR PUMP HEAD IS NOT USER-SERVICEABLE. It is delicate and difficult to re-assemble.
Disassembly of your pump head will void your warranty. Individual parts are not available. If
the pump head is faulty, it must be replaced with a new one.
WARRANTY CLAIMS must include receipt to prove date of purchase.
TO SHIP PUMP TO FACTORY FOR REPAIR:
Please call us before shipping anything.
[phone] FAX [phone] Email: [e-mail]
PLEASE tell us your MODEL & SERIAL NUMBERS
******************************************************************
WARRANTY
******************************************************************
Your pump is warranted to be free from defects in material and
workmanship for ONE (1) YEAR from date of purchase.
Failure to provide correct installation, operation, or care for the
product, in accordance with instructions, will void the warranty.
Product liability, except where mandated by law, is limited to repair or replacement, at the
manufacturer's discretion. No specific claim of merchantability shall be assumed or implied
beyond what is printed on the manufacturer's printed literature. No liability shall exist from
circumstances arising from the inability to use the product, or its inappropriateness for any
specific purpose. It is the user's responsibility to determine the suitability of the product for any
particular use.
In all cases, it shall be the responsibility of the customer to insure a safe installation
in compliance with local, state and national electrical codes.