DANLAW DATA LOGGER DL980SW USER MANUAL Revision: Initial Revision date: 3/11/2019
1.1 Product Overview Danlaw Data Logger – Vehicle Data Over the Air Danlaw’s Data Logger was developed to provide companies with an easy to install, wireless communication device for monitoring and logging vehicle network message data. The need for the DL980 was driven by Danlaw’s own experience with Networked Automotive Electronics solution development, and perfected to provide our customers with the benefits of our experience.
1.
2.0 Installation Instructions 1. Locate the OBD connector: If you are not able to locate the OBD connector, please refer to the Vehicle User Manual 2. Install the DL980SW device by plugging it into the OBD connector Warning: The device has to be installed in such a way that at all times a minimum distance of at least 20cm shall be kept between the device and the user.
3.0 Electronic Code of Federal Regulations The devices is subject to Part 15 of the Federal Rules / RSS-210 of Candian Rules and subject to certification procedure NOTICE: This device complies with Part 15 of the FCC Rules [and with Industry Canada licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4.
3.
