User Manual

Introduction and Overview
2.1 Connections and Power Switching
Danley DSA signal input and output connections are
accomplished via RCA Phono and Euroblock style connectors.
A GPIO (General Purpose In/Out) Euroblock connector enables
some amplier functions to be controlled externally, and
wireless or RJ45 socket Ethernet network connection options
are also provided. Cable connectors and connections are
described and illustrated in Section 6 of this manual
Danley DSA ampliers incorporate a front panel mounted
power button. Press the button once to switch the amplier
on or off. Amplier power management behaviour can be
congured via the Control web app Settings Menu described in
Section 5 of this manual.
2.2 Network Features
Danley DSA ampliers are TCP/IP network connected devices
that require a wired or wireless network connection to access
their conguration menus. The conguration menus are
accessed via the Control Web App interface and cover Input,
Zone, Output and General Settings functions. The Control web
app conguration menus are described in Section 5 of this
manual.
2.3 Firmware
This manual describes the features, functions and user
interface of Danley DSA ampliers running Firmware Version
1.2.0.
It is strongly recommended that the rmware version
installed in the amplier in use is checked initially, and
regularly thereafter. If updated rmware is available,
the amplier should be updated as a priority.
The rmware installed in the amplier can be identied
and updated by selecting the Device option in the Control
web app Settings Menu. Firmware versions can be checked,
and rmware downloaded, from the website: https://www.
danleysoundlabs.com
3. Carton Contents
Danley DSA ampliers are shipped in a cardboard carton
containing the amplier unit, a mains cable appropriate for the
sales territory, an accessory pack, and a document pack. The full
contents is listed below.
• Amplier unit
• Rack mount ears (tted)
• Mains power cable
• Input connector x 2
• GPIO socket connector
• Output connector x 1 or 2
• Adhesive rubber feet x 4
• Document pack