User Manual

Installation
Diagram 1a
Danley DSA amplier dimensions.
(Shaded area denes ventilation space.)
440 mm
17.3 in
332 mm
13.1 in
4. Installation
4.1 Amplier Location
Danley DSA ampliers are shipped with rack “ears” attached
and are primarily intended for standard (19 inch) equipment
rack installation. If not to be installed in an equipment rack,
Danley DSA ampliers can be placed free-standing on a at
surface. Adhesive rubber feet are supplied for this purpose.
It is important that any installation provides space for airow
through the ventilation apertures at the front and rear of the
amplier. This is illustrated in Diagram 1a.
88 mm
3.5 in