Full Product Manual

Page 4
For technical questions, please call 877.432.6627
IMPORTANT SAFETY INSTRUCTIONS
1. READ ALL INSTRUCTIONS.
2. CARE MUST BE TAKEN as burns can occur from touching hot parts.
3.
DO NOT operate equipment with a damaged power cord or if the equipment has been dropped
or damaged until it has been examined by a qualified service person.
4. DO NOT let the power cord come in contact with hot manifolds or moving fan blades.
5. IF AN EXTENSION CORD IS NECESSARY, a cord with a current rating equal to or more than that
of the equipment should be used. Cords rated for less current than the equipment may overheat.
Care should be taken to arrange the cord so that it will not be tripped over or pulled.
6.
ALWAYS UNPLUG EQUIPMENT FROM ELECTRICAL OUTLET WHEN NOT IN USE. Never use
the power cord to pull the power plug from the outlet. Grasp the plug and pull to disconnect.
7.
LET EQUIPMENT COOL COMPLETELY BEFORE PUTTING AWAY. Loop power cord loosely
around equipment when storing.
8.
TO REDUCE THE RISK OF FIRE, do not operate equipment in the vicinity of open containers of
flammable liquids (i.e., gasoline)
9.
ADEQUATE VENTILATION SHOULD BE PROVIDED when working on operating internal
combustion engines.
10.
KEEP HAIR, LOOSE CLOTHING, FINGERS, AND ALL PARTS OF THE BODY AWAY FROM
MOVING PARTS.
11. TO REDUCE THE RISK OF ELECTRIC SHOCK, do not use on wet surfaces or expose to rain.
12.
USE ONLY AS DESCRIBED IN THIS MANUAL. Use only manufacturer’s recommended
attachments.
13. DO NOT raise vehicle on the lift until installation is completed as instructed in this manual.
14.
KEEP HANDS AND FEET CLEAR. Remove hands and feet from any moving parts. Keep feet
clear of lift when lowering. Avoid pinch points.
15. KEEP WORK AREA CLEAN. Cluttered work areas invite injuries.
16.
CONSIDER WORK AREA ENVIRONMENT. Do not expose equipment to rain. DO NOT use in
damp or wet locations. Keep area well lit.
17.
ONLY TRAINED OPERATORS should operate this lift. All non-trained personnel should be
kept away from work area. Never let non-trained personnel come in contact with, or operate
lift.
18. USE LIFT CORRECTLY. Use lift in the proper manner. Never use lifting adapters other than what
is approved by the manufacturer.
19. DO NOT override self closing lift controls.
20. REMAIN CLEAR of lift when raising or lowering vehicle.
21. CLEAR AREA if vehicle is on danger of falling.