Measurement Guide
10,000-lb. Capacity / Asymmetric Clearoor / Two-Post Li /
Includes Stackable Pads and Adapters
D2-10A TWO-POST LIFT
SKU 5175313
With a 10,000-lb. liing capacity, the Dannmar D2-10A ulizes
asymmetric columns posioned in a slightly rotated angle, thus
allowing the vehicle’s doors to swing open which makes it easy to
enter and exit the vehicle.
SPEC SHEET
Rev 8-25-2020
SKU 5175313
DESCRIPTION
Model D2-10A
Style Asymmetric
SKU# 5175313
Liing Capacity 10,000 lbs. (4,536 kg)
A - Lowered Height + Pad 5" (127 mm)
B - Maximum Liing Height (Top Lock) 78.5" (1,994 mm)
C - Max. Rise 69” (1,753 mm)
D - Height Overall 145" (3,683 mm)
E - Width Overall 143.5" (3,645 mm)
F - Width Outside Columns 137.25" (3,486 mm)
G - Width Inside Columns 120.75" (3,067 mm)
H - Drive-Thru Clearance 100" (2,540 mm)
I - Floor to Top Switch 141" (3,581 mm)
J - Front Arm Reach 29.25" (743 mm) - 43.75” (1,111 mm)
K - Rear Arm Reach 40.25" (1,022 mm) - 58” (1,473 mm)
Max. Load per Arm 2,500 lbs. (1,134 kg)
Time to Full Rise 45 seconds
Noise 45 dB
Motor (*) 220 VAC / 60 Hz / 1 Ph
* Special voltages available upon request.
SPECIFICATIONS
© 2020 BendPak Holdings LLC. A wholly owned subsidiary of BendPak, Inc.
1-877-432-6627 sales@dannmar.com www.dannmar.com
1645 Lemonwood Dr.
Santa Paula, CA 93060