Instructions / Assembly

• Motor can not run on 50HZ without a physical change in the motor.
• Use a separate breaker for each power unit.
• Protect each circuit with a time delay fuse or circuit breaker.
• For 208-230 volt, single phase, use a 30 amp fuse.
• For 208-230 volt, three phase, use a 30 amp fuse.
• For 460 volt, three phase, use a 30 amp fuse.
• DO NOT attempt to raise vehicle until a thorough operation check has been completed.
WIRING DIAGRAM
WARNING
VISIT US ON THE WEB AT WWW.DANNMAR.COM24