Instructions / Assembly

VISIT US ON THE WEB AT WWW.DANNMAR.COM32
TYPICAL LIFTING POINTS
Make sure vehicle is neither front nor rear heavy. Center of balance should be midway between adapters
as shown below.
7. Stop before making contact with vehicle. Check arm restraint pins for engagement. If required, slightly
move arm to allow restraint gear and pawl to mesh. DO NOT hammer arm restraint pin down as this
will damage the restraint gear teeth.
8. Raise vehicle until tires clear the floor.
9. Stop and check adapters for secure contact at vehicle manufacturer’s recommended lift points.
10. Continue to raise to desired height only if vehicle is secure on lift.
WARNING
Symmetric Vehicle Loading
Asymmetric Vehicle Loading