Measurement Guide

10,000-lb. Capacity / Symmetric Clearoor / Two-Post Li /
Includes Stackable Pads and Adapters
D2-10C TWO-POST LIFT
SKU 5175314
The Dannmar D2-10C two-post li is a great choice in direct-
drive liing technology. Ulizing the best components with a
proven design to oer you a 10,000-lb. liing capacity at an
incredible value.
SPEC SHEET
Rev 8-25-2020
SKU 5175314
DESCRIPTION
Model D2-10C
Style Symmetric
SKU# 5175314
Liing Capacity 10,000 lbs. (4,536 kg)
A - Lowered Height + Pad 5" (127 mm)
B - Maximum Liing Height (Top Lock) 78.5" (1,994 mm)
C - Max. Rise 69” (1,753 mm)
D - Height Overall 145" (3,683 mm)
E - Width Overall 145.25" (3,690 mm)
F - Width Outside Columns 137.25" (3,486 mm)
G - Width Inside Columns 118.25" (3,004 mm)
H - Drive-Thru Clearance 106" (2,692 mm)
I - Floor to Top Switch 141" (3,581 mm)
J - Arm Reach 32.25" (819 mm) - 52.5” (1,334 mm)
Max. Load per Arm 2,500 lbs. (1,134 kg)
Time to Full Rise 45 seconds
Noise 45 dB
Motor (*) 220 VAC / 60 Hz / 1 Ph
* Special voltages available upon request.
SPECIFICATIONS
© 2020 BendPak Holdings LLC. A wholly owned subsidiary of BendPak, Inc.
1-877-432-6627 [e-mail] www.dannmar.com
1645 Lemonwood Dr.
Santa Paula, CA 93060