Datasheet

ManualsBrandsDANUBE ManualsPSU ComponentsDC/DC converter (print) 12 Vdc 5 Vdc 1 A 6 W No. of outputs: 1 x

DANUBE

http://www.danube.com.tw

2013/4/23

FEATURES

 3W TO 6W DIL & SMD PACKAGE

 4.5-9V,9-18V,18-36V,36-72V,9-36V,18-72V

WIDE INPUT RANGE

 100% BURN IN

 HIGH EFFICIENCY

 UL94-V0 PACKAGE MATERIAL

 CUSTOM SOLUTIONS AVAILABLE

 RoHS COMPLIANT

 3 YEARS WARRANTY

OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS

Voltage Setpoint Accuracy Input Voltage Range 2:1 or 4:1 Input Range

Single/Dual

+/-2% max. Input Filter Pi Network

Out1 +/-2% max. Protection Fuse Recommended

Dual Separate

Out2 +/-5% max. Remote ON/OFF Control Table 1

Out1 +/-2% max.

GENERAL SPECIFICATIONS

Triple

Out2/Out3

+/-5% max. Efficiency 70% min.

Temperature Coefficient +/-0.05%/

Isolation Voltage

Ripple & Noise(20MHz BW)

100mVp-p max.

Single/Dual/Triple 1500VDC or 3000VDC min.

Line Regulation

Dual Separate In to Out 1500VDC min.

Single/Dual +/-1% max.

Out1 to Out2

500VDC min.

Out1 +/-1% max. Isolation Resistance 10

ohms min.

Dual Separate

Out2 +/-3% max. Isolation Capacitance 40pF max.

Out1 +/-1% max. Switching Frequency 50KHz min.

Triple

Out2/Out3

+/-3% max. MTBF

>900,000 Hours

Load Regulation

Weight 17.5g Typ.

Single/Dual +/-0.5% max.

Case Material Five-Side Shielded Case

Output：3.3V +/-1% max.

Case Size(DIL) 31.8mm*20.3mm*12.2mm

Dual Separate Out1 +/-1% max. Case Size(SMD) 31.8mm*20.3mm*11.4mm

Out2 +/-5% max. Potting Material(DIL) Epoxy(UL94-V0)

Triple Out1 +/-1% max. Potting Material(SMD) Non potting

Out2/Out3

+/-5% max. Conducted Emissions EN55022 Class A

Minimum Load 20% of Full Load

Radiated Emissions EN55022 Class B

Short Circuit Protection Continuous

ENVIRONMENTAL SPECIFICATIONS

Short Circuit Restart Automatic

Operating Temperature -40

C to +71

Over Load Protection 3W~6W 110%~180

Storage Temperature -55

C to +125

Transient Response

200uS max.

Case Temperature +95

C max.

Humidity 95% max.

Cooling Free-Air Convection

ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD , AND 25

C UNLESS OTHERWISE NOTED.

1500VDC for 10 seconds,2000VDC~3000VDC for 3 seconds.

Measured with 1uF ceramic capacitor connect to the output pins.

High Line to Low Line.

MIL-HDBK-217F @25

C , Ground Benign.

Load Regulation is for output load current change from 20% to 100%.

25% Step Load Change.

SERIES

3W-6W WIDE INPUT RANGE

Summary of content (23 pages)

PAGE 1
CW SERIES 3W-6W WIDE INPUT RANGE FEATURES         3W TO 6W DIL & SMD PACKAGE 4.5-9V,9-18V,18-36V,36-72V,9-36V,18-72V WIDE INPUT RANGE 100% BURN IN HIGH EFFICIENCY UL94-V0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT 3 YEARS WARRANTY OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Voltage Setpoint Accuracy Input Voltage Range Single/Dual Dual Separate Triple +/-2% max. Input Filter Pi Network Out1 +/-2% max. Protection Fuse Recommended Out2 +/-5% max.
PAGE 2
 SELECTION GUIDE(1) 2:1 3W OUTPUT 1500VDC ISOLATION 7 INPUT VOLTAGE (VDC) OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (mA) CWS-0503.3(ABC)3M 4.5-9 3.3 CWS-0505(ABCD)3M 4.5-9 CWS-0512(ABCD)3M 4.5-9 CWS-0515(ABCD)3M 4.5-9 CWD-0505A3M MODEL NUMBER INPUT CURRENT(mA) EFF 8 (%) ISOLATION (VDC) 40 73 1500 685 40 73 1500 789 40 76 1500 200 789 40 76 1500 +/-5 +/-300 855 40 70 1500 4.5-9 +/-12 +/-125 810 40 74 1500 4.5-9 +/-15 +/-100 800 50 75 1500 CWS-1203.
PAGE 3
 SELECTION GUIDE(2) 4:1 3W OUTPUT 1500VDC ISOLATION 9 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT CURRENT(mA) FULL NO LOAD LOAD EFF 10 (%) ISOLATION (VDC) CWS-1203.3(ABC)3TM 9-36 3.
PAGE 4
 SELECTION GUIDE(3) 2:1 3W OUTPUT 2000VDC ISOLATION 11 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT CURRENT(mA) FULL NO LOAD LOAD EFF 12 (%) ISOLATION (VDC) CWS-0505P3(M) 4.5-9 5 500 685 40 73 2000 CWS-0512P3(M) 4.5-9 12 250 821 40 73 2000 CWS-0515P3(M) 4.5-9 15 200 789 40 76 2000 CWS-1203.3P3(M) 9-18 3.
PAGE 5
 SELECTION GUIDE(4) 2:1 4W-6W OUTPUT 1500VDC ISOLATION 13 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT CURRENT(mA) FULL NO LOAD LOAD EFF 14 (%) ISOLATION (VDC) CWS-0505(AB)5M 4.5-9 5 800 1081 40 74 1500 CWS-0512(AB)5M 4.5-9 12 333 1066 40 75 1500 CWS-0515(AB)5M 4.5-9 15 267 1068 40 75 1500 CWD-0505(AB)5M 4.5-9 +/-5 +/-400 1125 40 71 1500 CWD-0512(AB)5M 4.5-9 +/-12 +/-167 1073 120 75 1500 CWD-0515(AB)5M 4.
PAGE 6
 SELECTION GUIDE(5) 4:1 4W-5W OUTPUT 1500VDC ISOLATION 15 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT CURRENT(mA) FULL NO LOAD LOAD EFF 16 (%) ISOLATION (VDC) CWS-1203.3A5TM 9-36 3.
PAGE 7
 SELECTION GUIDE(6) 2:1 or 4:1 3W~5W DUAL SEPARATE OUTPUT 17 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) CWD-120505E3TM 9-36 CWD-120505E5TM 9-36 CWD-121515E3M 9-18 CWD-121515E5TM 9-36 CWD-122424E5TM 9-36 CWD-241212E5M 18-36 CWD-241515E3M 18-36 CWD-240505E3TM 18-72 CWD-481212E3M 36-72 V1:5V V1:300 V2:5V V2:300 V1:5V V1:450 V2:5V V2:450 V1:15V V1:100 V2:15V V2:100 V1:15V V1:150 V2:15V V2:150 V1:24V V1:95 V2:24V V2:95 V1:12V V1:18
PAGE 8
 SELECTION GUIDE(7) 2:1 or 4:1 3W DUAL SEPARATE OUTPUT 19 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) CWD-121515F3M 9-18 CWD-120505F3TM 9-36 CWD-121212F3TM 9-36 CWD-121515F3TM 9-36 CWD-122424F3TM 9-36 CWD-240505F3TM 18-72 CWD-241212F3M 18-36 CWD-241212F3TM 18-72 CWD-241515F3TM 18-72 CWD-242424F3TM 18-72 V1:15V V1:100 V2:15V V2:100 V1:5V V1:300 V2:5V V2:300 V1:12V V1:125 V2:12V V2:125 V1:15V V1:100 V2:15V V2:100 V1:24V V1:63 V2:2
PAGE 9
 SELECTION GUIDE(8) 2:1 4W TRIPLE OUTPUT MODEL NUMBER 21 OUTPUT OUTPUT INPUT INPUT VOLTAGE CURRENT CURRENT VOLTAGE (VDC) (mA) (mA) EFF 22 (%) (VDC) FULL NO LOAD LOAD ISOLATION (VDC) OUT1 OUT2 OUT3 OUT1 OUT2 OUT3 CWT-0505-12 4.5-9 +5 +12V -12V 300 100 100 1085 20 74 1500 CWT-0505-15 4.
PAGE 10
 SELECTION GUIDE(9) 2:1 3W OUTPUT 3000VDC ISOLATION 23 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) CWS-0503.3A3M-3K 4.5-9 CWS-0505A3M-3K CWS-0512A3M-3K INPUT CURRENT(mA) FULL NO LOAD LOAD EFF 24 ISOLATION 25 (%) (VDC) 3.3 755 683 40 73 3000 4.5-9 5 500 684 40 73 3000 4.5-9 12 250 789 40 76 3000 CWS-0515A3M-3K 4.5-9 15 200 789 40 76 3000 CWS-1203.3A3M-3K 9-18 3.
PAGE 11
 SELECTION GUIDE(10) 4:1 3W OUTPUT 3000VDC ISOLATION 26 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT CURRENT(mA) FULL NO LOAD LOAD EFF 27 ISOLATION 28 (%) (VDC) CWS-1203.3A3TM-3K 9-36 3.
PAGE 12
 SELECTION GUIDE(11) 2:1 4W-6W OUTPUT 3000VDC ISOLATION 29 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT CURRENT(mA) FULL NO LOAD LOAD EFF 30 ISOLATION 31 (%) (VDC) CWS-0505A5M-3K 4.5-9 5 800 1081 40 74 3000 CWS-1203.3A5M-3K 9-18 3.
PAGE 13
 SELECTION GUIDE(12) 4:1 5W OUTPUT 3000VDC ISOLATION 32 MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT CURRENT(mA) FULL NO LOAD LOAD EFF 33 ISOLATION 34 (%) (VDC) CWS-1203.3A5TM-3K 9-36 3.
PAGE 14
 SELECTION GUIDE(13) 2:1 3W OUTPUT(SMD PACKAGE) 35 INPUT VOLTAGE (VDC) OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (mA) CWS-1205(ABC)3MS 9-18 5 CWS-1212(ABC)3MS 9-18 CWS-1215(ABC)3MS MODEL NUMBER INPUT CURRENT(mA) EFF 36 (%) ISOLATION (VDC) 18 80 1500 301 35 83 1500 200 298 18 84 1500 +/-5 +/-300 313 18 80 1500 9-18 +/-12 +/-125 301 30 83 1500 CWD-1215(ABC)3MS 9-18 +/-15 +/-100 298 32 84 1500 CWS-2405(ABC)3MS 18-36 5 600 154 10 81 1500 CWS-2412(ABC)3MS 18-36
PAGE 15
 SELECTION GUIDE(14) 2:1 5W OUTPUT(SMD PACKAGE) 37 INPUT VOLTAGE (VDC) OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (mA) CWS-1205(ABC)5MS 9-18 5 CWS-1212(ABC)5MS 9-18 CWS-1215(ABC)5MS MODEL NUMBER INPUT CURRENT(mA) EFF 38 (%) ISOLATION (VDC) 18 80 1500 566 18 83 1500 400 595 18 84 1500 +/-5 +/-500 521 18 80 1500 9-18 +/-12 +/-230 554 30 83 1500 CWD-1215(ABC)5MS 9-18 +/-15 +/-190 565 32 84 1500 CWS-2405(ABC)5MS 18-36 5 1000 257 10 81 1500 CWS-2412(ABC)5MS 18-36
PAGE 16
 MECHANICAL DIMENSIONS PACKAGE "A" 20.3[0.80] 23 22 2.54[0.10] 2 3 BOTTOM VIEW 16 9 14 11 SIDE VIEW PIN SINGLE DUAL 2&3 -Vin -Vin 9 NC Common 11 NC -Vout 14 +Vout +Vout 16 -Vout Common 22 & 23 +Vin +Vin 31.8[1.25] 12.2[0.48] 15.24[0.60] NOTE: 5.08[0.20] 3.81[0.15] All dimensions are in mm[inches] Pin Size is Tolerance 0.6Φ ±0.05mm All Dimensions In mm(Inches) Tolerance .X or .XX= ±0.5mm PACKAGE "B" 20.3[0.
PAGE 17
PACKAGE "D" 20.3[0.80] 24 23 BOTTOM VIEW 15 14 13 PIN SINGLE 1 & 24 + Vin 2 & 23 -Vin 10 & 15 -Vout 11 & 14 NC 12 & 13 +Vout 1 2 2.06[0.08] SIDE VIEW 31.8[1.25] 10 11 12 NOTE: 15.24[0.60] 12.2[0.48] 2.54[0.10] Pin Size is Tolerance 0.6Φ ±0.05mm All Dimensions In mm(Inches) Tolerance .X or .XX= ±0.5mm 3.81[0.15] All dimensions are in mm[inches] PACKAGE "E" 20.3[0.80] 23 22 2.54[0.
PAGE 18
PACKAGE "P" 20.3[0.80] 24 23 BOTTOM VIEW 16 15 14 13 PIN SINGLE 1&2 +Vin 23 & 24 -Vin 9 & 10 -Vout 11 & 12 +Vout 13 & 14 NC 15 & 16 NC 1 2 2.06[0.08] SIDE VIEW 31.8[1.25] 9 10 11 12 15.24[0.60] 12.2[0.48] 2.54[0.10] NOTE: 3.81[0.15] All dimensions are in mm[inches] Pin Size is Tolerance 0.6Φ ±0.05mm All Dimensions In mm(Inches) Tolerance .X or .XX= ±0.5mm PACKAGE "T" 20.3[0.
PAGE 19
SMD PACKAGE "A" SMD PACKAGE 25.4[1. 00] 20.3[0. 80] PIN SINGLE DUAL 1 ON/OFF ON/OFF 2&3 -Vin -Vin 4&5 NC NC 9 NC COM 10 & 12 NC NC 11 NC -VOUT 13 & 15 NC NC 14 +VOUT +VOUT 16 -VOUT COM 20 & 21 NC NC 22 & 23 +VIN +VIN 24 NC NC 2. 0[ 0.08] 24 0.5[ 0.02] 1 20 5 31.8[1.25] BOTTOM VIEW 16 9 13 12 2. 54[0.10] 1.0[ 0.04] 10.9[0.43] All dim ens ions a re i n m m[inches] SMD PACKAGE "B" 11.4[0.
PAGE 20
2.54mm 2.54mm  RECOMMENDED FOOTPRINT DETAILS PACKAGE "A" PACKAGE "B" 2.54mm 2.54mm 23 22 16 14 2423 22 151413 2 3 9 11 1 2 3 1011 12 TOP VIEW TOP VIEW PACKAGE “D” 2.54mm 2.54mm PACKAGE “C” 2.54mm 2.54mm 2423 15 13 2423 151413 1 2 1011 12 1 2 1011 12 TOP VIEW TOP VIEW PACKAGE "F" 2.54mm 2.54mm PACKAGE "E" 2.54mm 2.54mm 23 22 16 14 2423 22 151413 2 3 9 11 1 2 3 1011 12 TOP VIEW DANUBE TOP VIEW http://www.danube.com.
PAGE 21
2.54mm PACKAGE “T” 2.54mm PACKAGE “P” 2.54mm 2.54mm 2423 16151413 2423 16151413 1 2 9 10 11 12 1 2 9 10 11 12 TOP VIEW TOP VIEW 2.54mm PACKAGE“S”[SMD] 2.54mm 24.37[0.96] 26.40[1.04] 24 23 21 14 13 TOP VIEW 1 2 11 12 2.03[0.08] 2.54[0.1] 1.5[0.06]  RECOMMENDED REFLOW SOLDERING PROFILE 250 Peak. Temp 240 °C (10 Sec. Max.) Temperature (° C ) 220 ° C 200 150 60 Sec. M ax. (> 2 20°C) 100 50 0 Time (s ec. ) DANUBE http://www.danube.com.
PAGE 22
 SIMPLIFIED SCHEMATIC SINGLE OUTPUT DUAL OUTPUT +Vin +Vout +Vin +Vout Common -Vout -Vout -Vin -Vin PFM CONTROLLER REFERENCE & ERROR AMP ISOLATION PFM CONTROLLER SEPARATE OUTPUT REFERENCE & ERROR AMP ISOLATION TRIPLE OUTPUT +Vout1 +Vin +Vin +5V/300mA(Out1) -Vout1 +Vout2 +Vout(Out2) -Vout2 Common -Vin -Vout(Out3) -Vin PFM CONTROLLER PFM CONTROLLER REFERENCE & ERROR AMP ISOLATION  TYPICAL APPLICATIONS SINGLE OUTPUT INPUT OUTPUT +Vin REFERENCE & ERROR AMP ISOLATION DUAL OUTPU
PAGE 23
 Table1 (Remote On/Off Control) Remote On/Off Control Parameter Min Supply On Max Under 1 VDC or Open Circuit Supply Off 4VDC Standby Input Current 0.2mA Control Input Current(On) -0.5mA Control Input Current(Off) 5mA Referenced to -Vin Control Common  INPUT FUSE SELECTION GUIDE 4.5-6.0V or 4.