Datasheet

ManualsBrandsDANUBE ManualsPSU ComponentsDC/DC converter (print) 5 Vdc 5 Vdc 200 mA 1 W No. of outputs: 1 x

DANUBE

http://www.danube.com.tw

2010/04/07

4-1

FEATURES

z DUAL IN LINE PACKAGE

z UP TO 1W UNREGULATED OUTPUT POWER

z 100% BURN IN

z HIGH EFFICIENCY

z INTERNAL SMD TECHNOLOGY

z LOW COST

z UL 94V-0 PACKAGE MATERIAL

z CUSTOM SOLUTIONS AVAILABLE

z MTBF>2,000,000 HOURS

z RoHS COMPLIANT

z 3 YEARS WARRANTY

OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS

Voltage Set-point Accuracy +/-2% max Input Voltage Range +/-10% max

Temperature Coefficient +/-0.05%/°C Input Filter Capacitor Typ

Ripple & Noise(20MHz BW)

100mVp-p max Protection Fuse Recommended

Line Regulation

+/-1.2% max

Load Regulation

(other Vout) +/-8% max

GENERAL SPECIFICATIONS

Load Regulation

(3.3V Vout) +/-12% max Efficiency 70%-82%

Minimum Load 20% of Full Load Isolation Voltage

1500 VDC min

Short Circuit Protection Momentary Isolation Resistance 10

ohms min

Isolation Capacitance 80pF max

Switching Frequency 100KHz min

MTBF

>2,900,000 Hours

ENVIRONMENTAL SPECIFICATIONS

Weight 1.7g Typ

Operating Temperature -25

°C to +71

°C Case Material Non-Conductive Plastic

Storage Temperature -55

°C to +125

°C Case Size A 12.75mm*10.10mm*7.05mm

Humidity 95% max Case Size B 12.70mm*10.10mm*7.67mm

Cooling Free-Air Convection Conducted Emissions EN55022 Class A

Radiated Emissions EN55022 Class A

ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD AND 25

°C UNLESS OTHERWISE NOTED.

Measured with 1uF ceramic capacitor connect to the output pins.

Line Regulation is for a 1.0% change in input Voltage.

Load Regulation is for output load current change from 20% to 100%.

Load Regulation is for output load current change from 20% to 100% when input voltage is 3.3V.

1500VDC for 10 seconds.

MIL-HDBK-217F @25

C , Ground Benign.

MAU SERIES

1W UNREGULATED

Summary of content (5 pages)

PAGE 1
MAU SERIES 1W UNREGULATED FEATURES z z z z z z z z z z z DUAL IN LINE PACKAGE UP TO 1W UNREGULATED OUTPUT POWER 100% BURN IN HIGH EFFICIENCY INTERNAL SMD TECHNOLOGY LOW COST UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE MTBF>2,000,000 HOURS RoHS COMPLIANT 3 YEARS WARRANTY OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Voltage Set-point Accuracy +/-2% max Input Voltage Range Temperature Coefficient 1 Ripple & Noise(20MHz BW) 2 Line Regulation +/-0.
PAGE 2
z SELECTION GUIDE 1W OUTPUT MODEL NUMBER MAUS-0305 INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT1 CURRENT(mA) EFF FULL NO LOAD LOAD (%)2 ISOLATIO N PACKAGE (VDC) 3 5 200 475 60 70 1500 A 3.
PAGE 3
z MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS PACKAGE ”A” TOP VIEW SIDE VIEW BOTTOM VIEW 12.75[0.50] 7.62[0.30] 0.25[0.01] DANUBE 10.10[0.40] 4 1 7.05[0.28]** 7.62[0.30] 7 3.81[0.15] 0.50[0.02] 5 5.08[0.20] All dimensions are in mm[inches] PIN SINGLE 1 -Vin 4 +Vin 5 +Vout 7 -Vout PIN SINGLE 1 -Vin 4 +Vin 5 +Vout 7 -Vout NOTE:Pin Size is Tolerance 0.50Φ ±0.05mm All Dimensions In mm(Inches) or .XX= ±0.5mm 2.54mm Tolerance .X TOP VIEW 7 1 2.
PAGE 4
z SIMPLIFIED SCHEMATIC z TYPICAL APPLICATIONS INPUT +Vin OUTPUT +Vout +Vout +Vin -Vout DC-DC CONVERTER OSCILLATOR DRIVER -Vin -Vin LOAD -Vout z TYPICAL PERFORMANCE CURVES Specifications typical at ta=25 OC , nominal input voltage , rated output current unless otherwise specified. VOUT VS LOAD(9Vout Models) 6.4 10.4 6.0 10.0 Vout(V) Vout(V) VOUT VS LOAD(5Vout Models) 5.6 9.6 5.2 9.2 4.8 8.
PAGE 5
z INPUT FUSE SELECTION GUIDE 3.0-3.6V 4.5-5.5V 10.8-13.2V 21.6-26.4V 43.2-52.8V INPUT VOLTAGE(VDC) INPUT VOLTAGE(VDC) INPUT VOLTAGE(VDC) INPUT VOLTAGE(VDC) INPUT VOLTAGE(VDC) 1500mA Slow-Blow Type 800mA Slow-Blow Type 300mA Slow-Blow Type 150mA Slow-Blow Type INPUT 100mA Slow-Blow Type OUTPUT Fuse +Vin +Vout DC-DC CONVERTER -Vin -Vout Note: Certain applications may require the installation of external fuse in front of the input.