Datasheet

ManualsBrandsDANUBE ManualsPSU ComponentsDC/DC converter (print) 5 Vdc 5 Vdc 200 mA 1 W No. of outputs: 1 x

DANUBE

http://www.danube.com.tw

2010/12/01

FEATURES

 SINGLE IN LINE PACKAGE

 UP TO 1W UNREGULATED OUTPUT POWER

 100% BURN IN

 HIGH EFFICIENCY

 INTERNAL SMD TECHNOLOGY

 LOW COST

 NO HEATSINK REQUIRED

 UL 94V-0 PACKAGE MATERIAL

 CUSTOM SOLUTIONS AVAILABLE

 RoHS COMPLIANT

 3 YEARS WARRANTY

OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS

Voltage Set-point Accuracy

+/-2% max Input Voltage Range +/-10% max

Temperature Coefficient +/-0.05%/

C Input Filter Capacitor Typ

Ripple & Noise(20MHz BW)

100mVp-p max Input Reflected Ripple Current

50mAp-p max

Line Regulation

+/-1.2% max Protection Fuse Recommended

Load Regulation

+/-8% max

Load Regulation

+/-12% max

Minimum Load 10% of Full Load

GENERAL SPECIFICATIONS

Short Circuit Protection Momentary Efficiency 70%-82%

Isolation Voltage

1500-3000 VDC

Isolation Resistance 10

ohms min

Isolation Capacitance 80pF max

Switching Frequency 100KHz Typ

ENVIRONMENTAL SPECIFICATIONS

MTBF

>2,000,000 Hours

Operating Temperature -25

C to +71

C Weight 1.3g Typ

Case Temperature +90

C max

Case Material Non-Conductive Plastic

Storage Temperature -55

C to +125

C Case Size 11.7mm*6.0mm*10.2mm

Humidity 95% max 11.7mm*7.5mm*10.1mm

Cooling Free-Air Convection Conducted Emissions EN55022 Class A

Radiated Emissions EN55022 Class B

ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD AND 25

C UNLESS OTHERWISE NOTED.

Measured with 1uF ceramic capacitor connect to the output pins.

Line Regulation is for a 1.0% change in input Voltage.

Load Regulation is for output load current change from 20% to 100%.

Load Regulation is for output load current change from 20% to 100% when input voltage is 3V and 3.3V.

1500VDC for 10 seconds,3000VDC for 3 seconds.

MIL-HDBK-217F @25

C , Ground Benign.

SERIES

1W UNREGULATED

Summary of content (6 pages)

PAGE 1
MU SERIES 1W UNREGULATED FEATURES            SINGLE IN LINE PACKAGE UP TO 1W UNREGULATED OUTPUT POWER 100% BURN IN HIGH EFFICIENCY INTERNAL SMD TECHNOLOGY LOW COST NO HEATSINK REQUIRED UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT 3 YEARS WARRANTY OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Voltage Set-point Accuracy +/-2% max Input Voltage Range +/-10% max ° Temperature Coefficient +/-0.
PAGE 2
 SELECTION GUIDE(1) 1W 1500VDC ISOLATION MODEL NUMBER MUS-0303 INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT 7 CURRENT(mA) EFF ISOLATION FULL NO LOAD LOAD (%)8 (VDC) PACKAGE 3 3 333 475 35 70 1500 B MUS-03.303 3.3 3 333 425 43 71 1500 B MUS-03.303.3 3.3 3.3 303 403 43 75 1500 B 3 5 200 475 50 70 1500 B MUS-03.305 3.3 5 200 404 46 75 1500 B MUS-0503.3 5 3.
PAGE 3
 SELECTION GUIDE(2) 1W 3000VDC ISOLATION INPUT MODEL OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT NUMBER (VDC) MUS-03.303.3-3K (VDC) (mA) INPUT 9 CURRENT(mA) EFF ISOLATION FULL NO LOAD LOAD (%)10 (VDC) PACKAGE 3.3 3.3 303 403 43 75 3000 B MUS-0505-3K 5 5 200 274 26 73 3000 B MUS-0509-3K 5 9 110 260 27 77 3000 B MUS-0512-3K 5 12 84 253 26 79 3000 B MUS-0515-3K 5 15 67 253 28 79 3000 B MUS-1203.3-3K 12 3.
PAGE 4
PACKAGE ”B” 11.7[0.46] FRONT VIEW PIN SINGLE 1 -Vin 2 +Vin 3 -Vout 4 +Vout 10.1[0.40] 3.81[0.15] 2.54[0.10] 1 2 3 4 7.5[0.30] NOTE:Pin Size is Tolerance 0.50Φ ±0.05mm 1.2[0.05] All Dimensions In mm(Inches) Tolerance .X BOTTOM VIEW or .XX= ±0.5mm All dimensions are in mm[inches] TOP VIEW 2.54mm 2.54mm  RECOMMENDED FOOTPRINT DETAILS PACKAGE "A" PACKAGE "B" 2.54mm TOP VIEW 1 2 3 4 2.
PAGE 5
 TYPICAL PERFORMANCE CURVES Specifications typical at ta=25 °C , nominal input voltage , rated output current unless otherwise specified. VOUT VS LOAD(5Vout Models) 4.2 6.4 3.9 6.0 Vout(V) Vout(V) VOUT VS LOAD(3.3Vout Models) 3.6 5.6 3.3 5.2 3.0 4.8 0 75 150 225 0 300 50 150 200 Output Current(mA) Output Current(mA) VOUT VS LOAD(9Vout Models) VOUT VS LOAD(12Vout Models) 10.4 13.5 10.0 13.0 Vout(V) Vout(V) 100 9.6 9.2 12.5 12.0 8.8 11.
PAGE 6
 INPUT FUSE SELECTION GUIDE 2.7-3.6V 4.5-5.5V 10.8-13.2V 21.6-26.4V 43.2-52.8V INPUT VOLTAGE(VDC) INPUT VOLTAGE(VDC) INPUT VOLTAGE(VDC) INPUT VOLTAGE(VDC) INPUT VOLTAGE(VDC) 1200mA Slow-Blow Type 500mA Slow-Blow Type 300mA Slow-Blow Type 150mA Slow-Blow Type INPUT 100mA Slow-Blow Type OUTPUT Fuse +Vin +Vout DC-DC CONVERTER -Vin -Vout Note: Certain applications may require the installation of external fuse in front of the input.