Datasheet

ManualsBrandsDANUBE ManualsPSU ComponentsDC/DC converter (print) 24 Vdc 5 Vdc 200 mA 1 W No. of outputs: 1 x

DANUBE

http://www.danube.com.tw

2009/06/04

FEATURES

z SINGLE IN LINE PACKAGE

z UP TO 1W REGULATED OUTPUT POWER

z 100% BURNED IN

z EFFICIENCY UP TO 53%

z INTERNAL SMD TECHNOLOGY

z NO EXTERNAL COMPONENTS REQUIRED

z LOW COST

z 1500VDC ISOLATION

z UL 94V-0 PACKAGE MATERIAL

z CUSTOM SOLUTIONS AVAILABLE

z RoHS COMPLIANT

z 3 YEARS WARRANTY

OUTPUT SPECIFICATIONS

Voltage Setpoint Accuracy

+/-3% max

Input Voltage Range +/-10% max

Temperature Coefficient

+/-0.05%/°C

Input Filter Capacitor Typ

Ripple & Noise(20MHz BW)

100mVp-p max Protection Fuse Recommended

Line Regulation

+/-1% max

Load Regulation

+/-1% max

GENERAL SPECIFICATIONS

Minimum Load 10% of Full Load Efficiency 50% min

Short Circuit Protection Current Limit Protection Isolation Voltage

1500 VDC min

Short Circuit Restart Automatic Isolation Resistance 10

ohms min

Transient Response

100uS max Isolation Capacitance 80pF max

Switching Frequency 100KHz min

MTBF

>1,800,000 Hours

ENVIRONMENTAL SPECIFICATIONS

Weight 2.3g Typ

Operating Temperature -25

°C to +71

°C Case Material Non-Conductive Plastic

Storage Temperature -55

°C to +125

°C Case Size 19.6mm*7.1mm*10.2mm

Humidity 95% max Conducted Emissions EN55022 Class A

Cooling Free-Air Convection Radiated Emissions EN55022 Class A

ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD , AND 25

°C UNLESS OTHERWISE NOTED.

Measured with 1uF ceramic capacitor connect to the output pins.

High Line to Low Line.

Load Regulation is for output load current change from 10% to 100%.

For 10 seconds.

25% Step Load Change.

MIL-HDBK-217F @25

°C , Ground Benign.

PR SERIES

1W REGULATED

Summary of content (4 pages)

PAGE 1
PR SERIES 1W REGULATED FEATURES z z z z z z z z z z z z SINGLE IN LINE PACKAGE UP TO 1W REGULATED OUTPUT POWER 100% BURNED IN EFFICIENCY UP TO 53% INTERNAL SMD TECHNOLOGY NO EXTERNAL COMPONENTS REQUIRED LOW COST 1500VDC ISOLATION UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT 3 YEARS WARRANTY OUTPUT SPECIFICATIONS Voltage Setpoint Accuracy +/-3% max Input Voltage Range Temperature Coefficient 1 Ripple & Noise(20MHz BW) 2 Line Regulation +/-0.
PAGE 2
z SELECTION GUIDE 1W OUTPUT MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT7 CURRENT(mA) EFF ISOLATION FULL NO LOAD LOAD (%)8 (VDC) OUTPUT POWER (Watt) PRS-0505C 4.5-5.5 5 200 333 40 60 1500 1 PRS-0509C 4.5-5.5 9 100 315 40 57 1500 0.9 PRS-0512C 4.5-5.5 12 84 333 32 60 1500 1 PRS-0515C 4.5-5.5 15 67 333 32 60 1500 1 PRS-1205C 10.8-13.2 5 200 126 15 66 1500 1 PRS-1209C 10.8-13.2 9 100 128 14 59 1500 0.
PAGE 3
z MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS PIN SINGLE 1 +Vin 2 -Vin 4 -Vout 5 NP 6 +Vout NOTE:Pin Size is Tolerance 0.50Φ ±0.05mm All Dimensions In mm(Inches) SINGLE OUTPUT TOP VIEW 1 2 4 or .XX= ±0.5mm 2.54mm Tolerance .X 2.54mm 6 z SIMPLIFIED SCHEMATIC z TYPICAL APPLICATIONS INPUT +Vin +Vout +Vin -Vout DC-DC CONVERTER OSCILLATOR DRIVER -Vin OUTPUT REGULATOR -Vin DANUBE +Vout LOAD -Vout http://www.danube.com.
PAGE 4
z TYPICAL PERFORMANCE CURVES Specifications typical at TA=25 OC, nominal input voltage , rated output current unless otherwise specified. EFFICIENCY VS LOAD 125% EFFICIENCY(%) OUTPUT POWER(%) DERATING CURVE 100% 75% 50% 25% SAFE OPERATING AREA 80.0 60.0 40.0 20.0 0.0 0% -25 0 25 50 70 0 100 20 40 60 80 100 % OF RATED LOAD(%) TA(degree C) z INPUT FUSE SELECTION GUIDE 4.5-5.5V 10.8-13.2V 21.6-26.