D205040 Less than 0.
Danze always recommends that plumbing products be installed by a licensed professional. Danze aconseja siempre que sea un profesional autorizado quien instale los productos de plomería. Danze recommande que les articles de plomberie soient toujours installés par un professionnel qualifié. Shut off main water supply before installation. Cierre el suministro de agua antes de instalar. Couper l’alimentation d’eau principale avant l’installation. 1.
4. A. Position the wall flange onto the shank of the wall valve body. (The flange will not pass over the set screw if it projects out). B. After sliding on the flange, unscrew the set screw so that the point inside is flush with the body wall. (You can not install the body onto the bracket if the set screw is in the way). C. Press the valve body onto the bracket; take care that the swing arm is level.
