Installation Guide

Maintenance Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically
with a soft cloth.Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty .
Faucet Installation Procedures/Instalación del Grifo/Procédures d’installation du robinet
Danze recommends that plumbing products be installed by a licensed professional.
Danze aconseja que sea un profesional autorizado quien instale los productos de plomería.
Danze recommande que les articles de plomberie soient installés par un professionnel qualifié.
Shut off the main water supply before installation by turning the valves clockwise.
Antes de realizar la instalación, cierre el suministro principal de agua girando las
válvulas en sentido horario
Fermez l'alimentation principale en eau avant l'installation en tournant les valves
d'alimentation dans le sens horaire
Place silicone sealant beneath the plastic gasket and install
faucet through center hole.
Ponga lasllador de silicona por debajo del empaque de
plastico e instale el grifo por el orificio del centro.
Mettre du enduit d'étanchéité au silicone sous le joint de
plastique et installer le robinet dans le trou ce tral
2.
3.
From underneath the sink, install the mounting hardware onto the
valve shank. Use the phillips screwdriver for final tightening after
the body is aligned.
Instale las piezas de montaje en el vástago de la válvula por la parte
de abajo del fregadero. Utilice un destornillador phillips para apretar
al final, una vez que esté alineado el cuerpo.
Sous l’évier, installer le matériel de fixation sur la tige de robinet. Employer
un tournevis Phillips pour effectuer le serrage final lorsque le corps est
bien placé.
1.