Danze Shower System Design Guide

4
2
20 psi
GPM
1 Port
Average
2 Ports
Average
3 Ports
40 psi 60 psi 80 psi
6
8
10
12
14
DIVERTER VALVE FLOW RATES*
*Connected to Danze 1/2” Thermostatic Valve
10
½˝ Thermostatic with 4-Port Diverter
Add a touch of luxury to your shower experience with the Danze
®
½˝ Thermostatic Custom Shower System.
Designed to work with ½˝ piping, our ½˝ Thermostatic Valve System is a logical upgrade from a standard ½˝
Pressure Balance Valve.
Volume and temperature are controlled by our ½˝ Thermostatic Valve, while our 4-port diverter directs water
flow to each of the outlets within your shower system.
Our ½˝ Thermostatic System is designed for ½˝ water supplies
and can support up to 3 or 4 shower components including
showerheads, personal shower systems and body sprays.
1
1.
This assumption is based on each shower component delivering a
maximum water output of 2.5 gpm (3 x 2.5 = 7.5 gpm).
½˝ Two Wall and
Ceiling Installation
Water Flow To Diverter
Integral Volume Control
Screwdriver stop and check valve
4-Port Diverter Valve
Ceramic Disc Valve
Deep wall extension kits available:
D151001B - Valve Kit
D130001B - Volume Control Kit
High Flow
Thermostatic
Valve
½˝ combination
copper/IPS connection
Base on each showerhead delivering
a maximum water output of
2.5 gpm (2.5 x 2 = 5.0 gpm)