Danze Shower System Design Guide

4
Danze provides shower system options to meet virtually any design and any budget. Before you start
creating your dream, you’ll need to assemble some basic information.
1.
Danze shower products and systems are designed to function with water supply pressure between
20 psi and 80 psi. Optimum water pressure is between 45 psi and 80 psi — so be sure to check
with your plumber or local water department.
2.
Measure the space - the floor, the walls, the ceiling and diameter of your existing drain.
3.
You’ll want to make sure you have enough hot water, so write down the size of your existing water
heater. Your plumber will size your water heater based on the system selected.
4.
List your desired components' showerheads, handheld showers and body sprays.
5.
Mark down the trim styles and finishes you like best.
6.
Sit down with your Danze design representative to design your new system.
Be sure to visit our website for a complete selection of decorative plumbing products to complement your
new shower system design and to find a Danze Registered Showroom near you.
Finishes
Danze shower systems are available in many finishes. Each collection is offered in at least two different finish options, * Polished
Brass and Polished Nickel products feature a unique Permanence
®
PVD finish that will never scratch, tarnish or corrode.
* Polished
Brass
Polished
Chrome
Brushed
Nickel
Distressed
Nickel
Oil Rubbed
Bronze
* Polished
Nickel
Design Your Danze
Shower System