Danze Shower System Design Guide

9
For product selection and specifications visit
www.danze.com
Our ¾˝ Thermostatic System is designed to provide a precise, consistent temperature throughout your
shower experience with individual control over each outlet.
A single thermostatic mixing valve can provide 16 gallons per minute at 45 psi to support up to 6 shower
components
1
. Your system should include a volume control for each showerhead, handshower and bank of
body sprays. The images below illustrate the plumbing configuration of a ¾˝ 2-wall shower system design.
¾˝ Thermostatic Valve Setup
The Danze ¾˝ Thermostatic Shower System consists of:
A mixing valve that precisely controls the temperature of the water in your shower
Individual volume controls that manage the water flow to each outlet
A volume control is required to operate the Danze ¾˝ Thermostatic Valve.
1.
Based on average output/flow of 2.5 gpm for each shower component.
Depending on system water pressure and the shower system components
selected, the Danze ¾˝ shower system may support more or less components.
¾
" VOLUME
CONTROL VALVE
¾
" - 14 NPT-FIP
High Flow Ceramic
Volume Control Cartridge
2
2
1
1
2
1