User manual

ManualsBrandsDAP-Audio ManualsDJ Equipment3-Channel DJ Mixer

Core Beat

Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands

Ordercode: D2313

MANUAL

ENGLISH

Summary of content (16 pages)

PAGE 1
MANUAL ENGLISH Core Beat Ordercode: D2313 Highlite International B.V.
PAGE 2
Core Beat Table of contents Warning ...............................................................................................................................................................................2 Unpacking Instructions .................................................................................................................................................2 Safety Instructions ............................................................................................................
PAGE 3
Core Beat Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
PAGE 4
Core Beat IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system.                              Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact.
PAGE 5
Core Beat Operating Determinations       This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The minimum distance between light-output and the illuminated surface must be more than 0.5 meter. The maximum ambient temperature ta = 45°C must never be exceeded. The relative humidity must not exceed 50 % with an ambient temperature of 35° C.
PAGE 6
Core Beat Microphone channel Mic input Connect a microphone here. Level control Adjusts the sound level output from the MIC channel. High control The High control adjusts the High frequency range. Range: -26dB to +12dB at 10kHz. Low control The Low control adjusts the Low frequency range. Range: -26dB to +12dB at 100Hz. Microphone switch Turns the microphone on/off. When set to TALK OVER, the sound of the channels, other than the MIC channel, are attenuated.
PAGE 7
Core Beat Main channels Selection switch (Line (39)/Line (40)) Assign Line (39) or Line (40) to Channel 1. Selection switch (Line (36)/Line (37)) Assign Line (40) or Line (41) to Channel 2. Selection switch (Line (33)/Line/MP3 (34)) Assign Line (33) or Line / MP3 (34) to Channel 3. Channel VU meter Displays the audio output signal level. Gain control Adjusts the level of the audio signal input in each channel. High control The High control adjusts the high frequency range. Range: -26dB to +12dB at 10kHz.
PAGE 8
Core Beat Output L/R signal VU meter Displays the audio level output from the MASTER terminal. Master volume control Adjusts the audio level output from the MASTER terminal. Booth volume control Adjusts the audio level output from the Booth monitor. Bluetooth section Bluetooth connectivity LED Displays the status of the Bluetooth connectivity. When the LED is blinking, the device is in matching state. When the light is constantly on, a device is connected to the Core Beat mixer.
PAGE 9
Core Beat Rear AC adapter inlet Connects to a power outlet using the included AC power adapter. Power switch Turns this unit‟s power on and off. Channel 2 RCA unbalanced input Connect to a DJ player or a line level output component. Channel 2 RCA unbalanced input Connect to a DJ player or a line level output component. Line – MP3 player switch Select input source Line - MP3 player. Channel 1 RCA unbalanced input Connect to a DJ player or a line level output component.
PAGE 10
Core Beat Connection Example D2313 9
PAGE 11
Core Beat Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
PAGE 12
Core Beat Connect a Bluetooth device 1. 2. 3. 4. 5. 6. 7. Turn on your Bluetooth device. Power on the DAP Audio Core Beat. Press the Pair/Unpair button on the DAP Audio Core Beat. Navigate to your Bluetooth device‟s setup screen, find “BT CORE” and connect. Note: If your Bluetooth device prompts for a pairing code, enter „0000‟. The DAP Audio Core Beat pairing LED will light up solid when it is 'paired'.
PAGE 13
Core Beat Product Specifications Model: DAP Audio Core Beat Input Channels: 1x Microphone, combo XLR/Jack 6x Line RCA 1x Bluetooth 1x Record, RCA 1x Booth, RCA 1x Master unbalanced, RCA 1x Headphones, TRS 6.
PAGE 14
Core Beat Dimensions D2313 13
PAGE 15
Core Beat Notes D2313 14