User manual

14
Ordercode: D1155
CDMP-750
Stop playback
There are two ways to stop playback:
01) Press the Play/Pause (13) button during playback mode to pause at that point.
02) Press the Cue (11) button during playback to return to the cue point and enter pause mode.
Fig. 09
Pausing
01) Press the Play/Pause (13) button to switch between play and pause.
02) The Play/Pause (13) button and the Cue (11) button will flash when the unit is in pause mode.
03) Playback resumes when the Play/Pause (13) button is pressed again.
Setting a cue point
01) Press the Play/Pause (13) button to switch between play and pause.
02) The Play/Pause (13) button and the Cue (11) button will flash when the unit is in pause mode.
03) Turn the Jog wheel (10) to go to your desired cue point (if necessary).
04) Press the Play/Pause (13) button again and your cue point has been stored and playback will
continue.
Setting a hot cue Point
01) Press the Play/Pause (13) button to switch between play and pause.
02) The Play/Pause (13) button and the Cue (11) button will flash when the unit is in pause mode.
03) Press the Rec (14) button, all four hot cue buttons (A (16), B (18), C (20) or D (22)) will light up in red.
04) Press the hot cue button (A (16), B (18), C (20) or D (22)) in which you want to store your hot cue
point. Now all hot cue buttons (A (16), B (18), C (20) or D (22)) which contain a cue point will light up
in green.
Cueing
Cueing is the action of preparing for playback.
01) Press the Cue (11) button, the player will enter the cue mode, the playback returns to the cue point
and enters pause condition, the Cue (11) button and the Play/Pause (13) button will flash.
Pressing the Play/ Pause (13) button will start playback from the cue point.
02) If the Cue (11) button is pressed after a search operation or scan operation, the playback returns to
the cue point and enters pause mode.
Note: If the Cue (11) button is pressed and held, playback will start from the cue point, when the button is
released the player will return to the cue point and enter pause mode automatically; it allows you
to check the cue point.