User manual

15
Ordercode: D1155
CDMP-750
Frame search
Frame search is a function for monitoring the sound at a certain section of the disc and manually
changing the position. Searching is used to set a starting point with precision.
01) Turn the Jog wheel (10) while in pause mode or cue mode to begin searching. The sound for one
revolution of the disc is output repeatedly. The point at which the sound starts is indicated on the
display.
02) While turning the Jog wheel (10), the point from which the sound output moves is a number of
frames corresponding with the number of milliseconds, and the time display on the LCD Display (15)
also changes.
03) The search point moves in the forward direction when the Jog wheel (10) is turned clockwise.
When the Jog wheel (10) is turned counterclockwise, the search point will move backwards.
Scanning (fast forward/fast backward)
Scanning is a function for moving quickly forward or backward while turning the Jog wheel (10).
01) Press the Jogmode (09) button until the unit enters search mode. The Search LED (07) will light up.
02) Turn the Jog wheel (10) to start scanning. The disc moves rapidly forward or backward and the
sound is audible. The current scan point is indicated on the display.
03) Turn the Jog wheel (10) clockwise to scan in the forward direction, counterclockwise to scan in the
reverse direction.
04) Press the Jogmode (09) button until neither the Search LED (07) and Scratch LED (08) are lit to exit the
search mode.
If the jog wheel is not used for 10 seconds while in search mode, the unit will automatically terminate
search mode.
Time display
Press the Time (28) button to select time display mode:
01) Elapsed time of a track (ELAPSED).
02) Remaining time of a track (REMAIN).
03) Remaining time of the disc (TOTAL REMAIN). This display mode can only be activated if a disc is
formatted as a CD.
Changing pitch of the song
There are three tools available for matching the BPM of the CD:
Use the pitch control fader to adjust the BPM.
01) Set the desired pitch bend range for the pitch control fader by pressing the Pitch bend (30 or 31)
buttons. Make sure that the pitch control fader is not deactivated (no range LED lit).
02) Adjust the BPM by sliding the Pitch control fader (32) up or down.
03) Slide the Pitch control fader (32) up to decrease BPM, or down to increase BPM. The adjustment
range is +/- 8%, 16% or 100% depending on the range, set up with the Range (36) button.
Use the pitch bend buttons to change the BPM temporarily.
01) The BPM increases or decreases respectively while pressing the Pitch bend + (30) of Pitch bend
(31) button.
02) The BPM increase depends on how long the button is held. If the button is held for about 5 seconds,
the BPM will increase by 16% for Pitch bend + (30) or by 16% for Pitch bend – (31).
If you tap the button, the BPM will only change a little so that you can change the beat slightly
without an audible change in the music.
03) The CD will return to the BPM set with the Pitch control fader (32) once the Pitch bend + (30) and
Pitch bend – (31) buttons are both released.
Turn the jog wheel while in jog mode to change the BPM temporarily.
01) Rotate the Jog wheel (10) clockwise during play to increase the BPM and counterclockwise to
decrease the BPM. The faster you turn the wheel, the more the BPM changes. The adjustment range
is +/- 16%.
02) Once the Jog wheel (10) is released, the track will return to the BPM set with the Pitch control
fader (32).