User manual

18
Ordercode: D1155
CDMP-750
Maintenance
The DAP Audio-CD-Player CDMP-750 requires almost no maintenance.
However, the unit should be kept clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth.
Do not immerse in liquid. Do not use alcohol or solvents.
Keep connections clean.
Disconnect electric power, and then wipe the audio connections with a damp cloth.
Make sure that connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
DAP Audio-CD-Player CDMP-750
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, follow the steps below in sequence until solution is found.
01) If the device does not operate properly, unplug the device.
02) Check main power supply, all cables, connections, etc.
03) If all of the above appears to be in order, plug the unit in again.
04) If nothing happens after 30 seconds, unplug the device.
05) Return the device to your DAP Audio dealer.