User manual

3
Ordercode: D1155
CDMP-750
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.
 Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
 Never remove warning or informative labels from the unit.
 Never use anything to cover the ground contact.
 Never leave any cables lying around.
 Do not insert other objects than CDs in the CD slot.
 Do not connect this system to a dimmerpack.
 Do not switch the system on and off in short intervals, as this may reduce the unit’s lifespan.
 Do not open the device and do not modify the device.
 Only use system indoor, avoid contact with water or other liquids.
 Avoid flames and do not store in the vicinity of flammable liquids or gases.
 Always disconnect power from the mains when the unit is not used. Only handle the power cord by
the plug. Never pull out the plug by tugging the power cord.
 Make sure you do not use the inappropriate kind of cables or defective cables.
 Make sure that the available voltage is not higher than stated on the rear panel.
 Make sure that the power cord is never crimped or damaged. Check the system and the power
cord from time to time.
 Please turn off the power switch, when changing a signal cable.
 If the device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
 If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation might damage your system.
Leave the system switched off until it has reached room temperature.
 If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Dap Audio dealer for service.
 Repairs, servicing and electric connection must be carried out by a qualified technician.
 For replacement use fuses of same type and rating only.
 WARRANTY: Until one year from date of purchase.
Operating Determinations
This system is not designed for permanent operation. Consistent operation breaks will ensure that the
system will serve for a longer amount of time without defects.
If this system is operated in any other way than the one described in this manual, the product may suffer
damages and the warranty can become void.
Any other operation may lead to various hazards like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious injuries and/or damage of property !