User manual

7
Ordercode: D1155
CDMP-750
Installation
Remove all packing materials from the CD Player. Check if all the foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. The power supply is printed on the backside of the device.
Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connections:
01) Turn off the Power switch (44).
02) Connect the Line out L/R (41) outputs to the input of your mixer.
CAUTION: Ensure that the power is off while connecting the cables.
Frontside
Backside
Disc Slot
Digital out
Line out L/R
Remote jack
Relay jack
Power switch
Power cord
Fig. 03