User manual

IR-100
Ordercode: D1249
Check Network when Power On
01) Press the buttons (16/18/29/32) to choose between Enable and Disable.
02) Press the ENTER button (20/31) to confirm your choice.
03) If you have chosen Enable, the device will try to connect to your network, immediately upon start-
up.
7.4. Date & Time
With this menu it is possible to adjust the time settings of the IR-100.
01) Press the buttons (16/18/29/32) to choose one of the 4 menus:
• Set Date and Time
• Set Time Format
• Set Date Format
• Daylight Saving Time (DST)
02) Press the ENTER button (20/31) to open the desired menu.
Set Date and Time
01) Press the buttons (16/18/29/32) to choose Manual Setup or Auto Detect.
02) Press the ENTER button (20/31) to open the menu.
03) If you have chosen Manual Setup, press the buttons (15/17/30/33) (to toggle between day,
month, year, hour and seconds) and the buttons (16/18/29/32) (to edit the values).
04) Press the ENTER button (20/31) to store changes.
05) If you have chosen Auto Detect, the device will automatically set the correct time and date.
Set Time Format
01) Press the buttons (16/18/29/32) to choose between 12-hour and 24-hour time display mode.
02) Press the ENTER button (20/31) to confirm your choice.
Set Date Format
01) Press the buttons (16/18/29/32) to choose one of the 3 time display modes:
• YYYY/MM/DD
• DD/MM/YYYY
• MM/DD/YYYY
02) Press the ENTER button (20/31) to confirm your choice.
Daylight Saving Time (DST)
01) Press the buttons (16/18/29/32) to choose between ON and OFF
02) Press the ENTER button (20/31) to confirm your choice.
03) If you have chosen ON, the device, will set the clock forward in the summer and backward in the
winter.
19