User manual

IR-100
Ordercode: D1249
7.5. Alarm
01) Press the buttons (16/18/29/32) to toggle between the following options:
• Alarm 1
• Alarm 2
• NAP Alarm
• Alarm Volume
02) Press the ENTER button (20/31) to open the desired menu.
Alarm 1 and Alarm 2
01) Press the buttons (16/18/29/32) to choose between Turn On and Turn Off.
02) Press the ENTER button (20/31) to confirm your choice.
03) If you have chosen Turn On, the display will show the following 3 options:
• Repeat
• Time
• Sound
04) Press the buttons (16/18/29/32) to select the desired menu. Press the the ENTER button (20/31) to
open.
05) If you have chosen Repeat, while in step 4, press the buttons (16/18/29/32) to select how often
the alarm should go off: once, every day or on particular days of the week (Monday-Sunday).
06) Press the ENTER button (20/31) to confirm your choice.
07) If you have chosen Time, while in step 4, press the buttons (15/17/30/33) to toggle between
hours and minutes. Press the buttons (16/18/29/32) to set time.
08) Press the ENTER button (20/31) to confirm your choice.
09) If you have chosen Sound, while in step 4, press the buttons (16/18/29/32) to select the alarm
source. The are 4 available options: Beep, Melody, Internet Radio and FM radio.
10) Press the ENTER button (20/31) to confirm your choice.
11) The alarm will go off at the preset time.
NAP Alarm
01) Press the buttons (16/18/29/32) to set the amount of time which needs to pass before the device
enters stand-by mode. The available options are: 5, 10, 20, 30, 60, 90 and 120 minutes.
02) Press the ENTER button (20/31) to confirm your choice.
03) The NAP alarm will activate after the preset time.
Alarm Volume
01) Press the buttons (15/17/30/33) or turn the control (06) to the left or right, in order to
decrease/increase the alarm volume.
7.6. Timer
01) Press the buttons (16/18/29/32) and the buttons (15/17/30/33) to set the timer.
02) Once the timer has been set, press the ENTER button (20/31) to start countdown.
7.7. Language
01) Press the buttons (16/18/29/32) to select the desired language version. The available languages
are: English, German, Spanish, French, Portuguese, Dutch, Italian, Russian, Swedish, Norwegian,
Danish, Hungarian, Czech, Slovak, Polish, Turkish and Finnish.
02) Press the ENTER button (20/31) to confirm your choice.
7.8. Dimmer
01) Press the buttons (16/18/29/32) to choose between Power Saving and Turn On.
02) Press the ENTER button (20/31) to confirm your choice.
03) If you have chosen Power Saving, the display will darken.
04) If you have chosen Turn On, the display will remain bright.
20