User manual

IR-100
Ordercode: D1249
7.9. Display
01) Press the buttons (16/18/29/32) to choose between Color and Monochrome.
02) Press the ENTER button (20/31) to confirm your choice.
03) If you have chosen Color, the display will use multiple colors.
04) If you have chosen Monochrome, the display will use greyscale.
7.10. Power Management
01) Press the buttons (16/18/29/32) to choose between Turn Off, 5, 15 and 30 minutes.
02) Press the ENTER button (20/31) to confirm your choice.
03) The device will enter stand-by mode, if no button is pressed within the preset amount of time.
7.11. Sleep Timer
01) Press the buttons (16/18/29/32) to choose between Turn Off, 15, 30, 60, 90, 120, 150 and 180
minutes.
02) Press the ENTER button (20/31) to confirm your choice.
03) The device will enter stand-by mode, once the preset amount of time has passed.
7.12. Buffer
01) Press the buttons (16/18/29/32) to choose one of the buffers: 2, 4 and 8 seconds.
02) Press the ENTER button (20/31) to confirm your choice.
03) In case of a Wi-Fi connection error, the IR-100 will keep on working as it saves the Internet data in
advance, in order to ensure undisrupted performance.
7.13. Weather
01) Press the buttons (16/18/29/32) to choose one of the following 3 options:
• Set Location
• Temperature Unit
• Show on Standby
02) Press the ENTER button (20/31) to confirm your choice.
Set Location
01) Press the buttons (16/18/29/32) to choose the continent and press the ENTER button (20/31) to
confirm your choice.
02) Repeat step 1 in order to choose the desired countries and cities.
Temperature Unit
01) Press the buttons (16/18/29/32) to choose between the two units of temperature: Celsius or
Fahrenheit.
02) Press the ENTER button (20/31) to confirm your choice.
Show on Standby
01) Press the buttons (16/18/29/32) to choose between Off and On.
02) Press the ENTER button (20/31) to confirm your choice.
03) If you have chosen On, the device will display the weather information, while in stand-by mode.
21