MANUAL ENGLISH PSS-108 MKII / PSS-110 MKII Ordercode: D2608 / D2609 Highlite International B.V.
PSS-108 MKII / PSS-110 MKII Table of contents Warning ...............................................................................................................................................................................2 Safety Instructions .........................................................................................................................................................2 Operating Determinations ................................................................................
PSS-108 MKII / PSS-110 MKII Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
PSS-108 MKII / PSS-110 MKII IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system. ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact.
PSS-108 MKII / PSS-110 MKII Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place.
PSS-108 MKII / PSS-110 MKII Description of the device Features The PSS-series MKII is the successor of the PSS-series with a complete new design in a lightweight ABS housing. The PSS-series MKII is a complete portable PA system powered by an internal battery. When it is used on mains power the battery will be charged automatically. The built-in charger has an overload protection circuit and a battery level indicator.
PSS-108 MKII / PSS-110 MKII Names and Functions PSS-108 MKII PSS-110 MKII Master volume control: This is main master control used for adjusting the main output level. Low frequency control; ±10 dB at 100 Hz Use this control to adjust the bass frequencies. High frequency control; ±10 dB at 10 kHz Use this control to adjust the high frequencies.
PSS-108 MKII / PSS-110 MKII PSS-108 MKII PSS-110 MKII Volume control Channel 1 Use this control to adjust the volume of the mic/line 1 channel input (17) Volume control Channel 2 Use this control to adjust the volume of the mic 2 channel input (18) Volume control Channel 3 Use this control to adjust the volume of the line 3 channel input (19) Connection indicator wireless microphone 1 Pairing status indicator: Blinking: In pairing status Continuous: Microphone connected with PSS-108 MKII/ PSS-110 MKII Vol
PSS-108 MKII / PSS-110 MKII PSS-108 MKII PSS-110 MKII Display All the USB player information is monitored through this display. Previous track Use this button to go back to the beginning of the current track or select a previous track for playing. Increase volume Press the VOL+ button to increase the volume. Repeat All - 1 – A (Shuffle play) Use this button to repeat one track, one folder or all tracks.
PSS-108 MKII / PSS-110 MKII Wireless Microphone Power/Pair button Power on/off the DW-24H by pressing and holding it for about 0.
PSS-108 MKII / PSS-110 MKII Installation Remove all packing materials from the PSS-108/110 MKII. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. The power supply is printed on the back of the device.
PSS-108 MKII / PSS-110 MKII USB/MP-3 Operations MP3 USB cards MP3 is an audio compression mode using level 3 of the international MPEG standard, whereby the sound signal is compressed at the ratio of 12:1. An MP3 disc can record music for playback over 600 minutes or record over 170 songs in MP3 sound quality. An USB stick or SD/MMC card can record even more. Obviously the PSS series works also with normal audio CD’s. The file system should be FAT16 or FAT32. The maximum capacity is 64 Gb.
PSS-108 MKII / PSS-110 MKII Operation of the wireless microphones Inserting/replacing the battery We recommend powering the microphone by a 9V PP3 alkaline battery. ● ● ● ● Push down (1) the cover in the direction of the arrow. Slide (2) the cover in the direction of the arrow. Insert the battery. Please observe correct polarity when inserting the battery. Close and lock the battery cover. Tips for achieving maximum performance.
PSS-108 MKII / PSS-110 MKII Product Specification PSS-108 MKII Power Supply System Type Transducer Low Transducer driver Horn Coverage Hº x Vº Frequency Response(-6dB) Crossover Frequency Max SPL AMP Power Output Equalizer Controls External Controls Voice Priority Signal to noise ratio Battery charge time Battery use time Wireless Frequency band Built-in player Enclosure Construction Mounting Dimensions(HxWxD) Net Weight AC: 100V-240V Battery: 22.
PSS-108 MKII / PSS-110 MKII PSS-110 MKII Power Supply System Type Transducer Low Transducer driver Horn Coverage Hº x Vº Frequency Response(-6dB) Crossover Frequency Max SPL AMP Power Output Equalizer Controls External Controls Voice Priority Signal to noise ratio Battery charge time Battery use time Wireless Frequency band Built-in player Enclosure Construction Mounting Dimensions(HxWxD) Net Weight AC: 100V-240V Battery: 25.9V(lithium battery) 2-Way Active Vented Speaker 10" Woofer, 1.
©2014 DAP Audio
