User manual

7
Ordercode: D2609
PSS-110 MKII
Volume control Channel 1
Use this control to adjust the volume of the mic/line 1 channel input (17)
Volume control Channel 2
Use this control to adjust the volume of the mic 2 channel input (18)
Volume control Channel 3
Use this control to adjust the volume of the line 3 channel input (19)
High frequency control; ±10 dB at 10 kHz
Use this control to adjust the high frequencies.
Master volume control:
This is main master control used for adjusting the main output level.
Line / Mic. Switch
Select the input source on Channel 1 (Line / Mic)
Battery level indicator
Battery status
Low frequency control; ±10 dB at 100 Hz
Use this control to adjust the bass frequencies.
Recharge indicator
When charging, the LED is burning continuously
Power LED indicator
This LED indicates when the power is switched on.
Line / Mic in connector 1
This combined jack can be used to connect a mono signal, such as a XLR microphone or a ¼" jack
connector which connects to line-level signal sources.
Mic in connector 2
This combined jack can be used to connect a mono signal, such as a XLR microphone or a ¼" jack
connector which connects to line-level signal sources.
RCA unbalanced input Channel 3
These are unbalanced stereo RCA pin jacks.
Line out
Connect to the line input of a Mixer.
Voice priority
Decreases the volume of all channels, except microphone 1 and the (1 or 2) wireless mic(s)