User manual

7
IMIX 7.2 USB
Ordercode: D2352
Functions
1/2/3. Equalizer section (hi/mid/low)
The microphone channel’s equalizer section allows shaping of the incoming
audio signal. All input channels are fitted with 3-band EQ. The hi (2) and low
(1) shelving controls have their frequencies fixed at 5 KHz and 120 Hz
respectively. The mid (3) range control has a peaking response frequency
at 800 KHz. All 3 bands have up to 12dB cut and boost, with a centre detent
for off. Turning an equalizer control to the right amplifies the frequency
range; turning to the left attenuates the signal. Minor changes to an
equalizer control usually produce the best results. Try to avoid excessive
enhancement of the mid band.
4. Talkover on switch
Use this switch to activate the talkover function.
5. Master assign buttons
Use these 2 switches to assign the channel to the master A, master B output
or both.
6. Reverb control
Use this control to adjust the amount of reverb you wish to add to the
corresponding microphone channel.
7. Mic volume control (Mic 1/2)
Controls the volume of the corresponding microphone channel.
8. Mic on/off button
Use this witch to mute the according microphone channel.