MMIX-4 ORDERCODE D1965 Highlite International B.V.
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP MMIX-4 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP MMIX-4™ Product Guide Warning ........................................................................................................................................................................... 3 Unpacking Instructions ............................................................................................................................................. 3 Safety Instructions ...........................................................................................................
Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never leave any cables lying around. Do not insert objects into air vents. Do not connect this system to a dimmerpack. Do not switch the system on and off in short intervals, as this would reduce the system’s life. Do not open the device and do not modify the device. Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output. Do not plug Mics into the console (or stagebox) while Phantom Power is on.
Connection with the mains. Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International L N EU (including UK) From April 2004 Brown Blue Green/Yellow North America Pin Black White Green Phase Neutral Protective Earth Make sure that the device is always connected properly to earth! Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Description of the device The DAP MMIX-4 is a basic 4 channel mixer that can be used for many applications. Because of the split outputs it is ideal to use as sub-mixer or monitor mixer when you use in ear systems. It has 4 combo inputs for line or instrument signals and an aux input which makes it easy to expand if you like to combine more MMIX-4 mixers. Features • XLR / Jack combo inputs • Split outputs • Compact • Ideal for in-ear pre-mix Overview Fig.
Frontview Fig. 2 1. Channel 1 level control Use this control to adjust the level of channel 1. 2. Channel 2 level control Use this control to adjust the level of channel 2. 3. Channel 3 level control Use this control to adjust the level of channel 3. 4. Channel 4 level control Use this control to adjust the level of channel 4. 5. Output L/R signal VU meter This meter is a multi-step LED; respectively the green LEDs show -20, -5 and 0dB. red LEDs show +6 and +20 dB.
13. Channel 3 pan control By using the panorama control you can change the input signal’s position within the stereo image. When the panorama control is set to center position, the audio signal is equal for both the left and right output. 14. Channel 4 pan control By using the panorama control you can change the input signal’s position within the stereo image. When the panorama control is set to center position, the audio signal is equal for both the left and right output. Rear Fig. 3 15.
Installation Remove all packing materials from the MMIX-4. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Install this device on a flat surface, not bend or curved.
Example 2: Expanding your mixer with additional monitor groups Fig.
Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
Compensation of interference with balanced connections Maintenance The DAP MMIX-4 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specifications Input connectors: Main output connectors: Aux input connectors: Split output connectors: Output level (max): Frequency response: Distortion: Noise: Input impedance: Aux impedance: Output impedance: Dimensions: Power supply: Weight: XLR / Jack combo 6,3mm Jack 6,3mm Jack XLR 13 dB 22-22.000 Hz <0.025% <61dB 5.9 KOhm 18,2 KOhm 1KΩ balanced/ 500Ω unbalanced 205 x 212 x 43,5 (DxWxH) 14-18V, 150mA 1,41 Kg Design and product specifications are subject to change without prior notice.
