Palladium P-400 P-500 P-700 P-900 P-1200 P-1600 P-2000 ORDERCODE D4131 ORDERCODE D4132 ORDERCODE D4133 ORDERCODE D4134 ORDERCODE D4135 ORDERCODE D4136 ORDERCODE D4137
Congratulations! You have bought a great, innovative product from DAP Audio. The Dap Audio Palladium Vintage Series brings excitement to any venue. Whether you want simple plug-&play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional sound equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Dap Audio Dap Audio Palladium Vintage Series ™ Product Guide Warning..…...................................................................................…………………………………………. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. 2 2 3 Description..…..............................................................................……….………………………………… Features Frontside………………………………………………………………………………….……...…. Backside…….……………………………………………………………………………………….…….
WARNING CAUTION! Keep this device away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • • • • • • • Make sure that the amplifier is turned down, before turning the power on or off. So you can avoid supersonic frequencies, which could damage your speakers. Don't put your equipment next to TV, radio, etc., because of interference or distortion. If you connect other parts of the system, be careful of ground loops. The best way to avoid ground loops is connecting the electrical system ground to one central point ("star" system).
Description of the device Features The Palladium Vintage is an amplifier from DAP Audio. There are 7 different versions: P-400, P-500, P-700, P-900, P-1200, P-1600, P-2000.
Backside 5. Power cord 6. Fuse 7. 5-way Binding post output Connectors 8. Signal Ground Lift Barrier Strip 9. Bridged, Parallel, Stereo 10. Balanced Phone Jack Inputs Installation Palladium Vintage Installation Remove all packing materials. Check that all foam and plastic padding has been removed. Screw the equipment into a 19" rack. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.
The phone connectors have a standard Tip-Ring-Sleeve (TRS) – configuration: The tip is positive (+), the ring is negative (-) and the sleeve is ground. a) Jack-Inputs Balanced Signals Tip-HOT Ring-COLD Sleeve-Ground b) Jack-Inputs Unbalanced Signals Tip-HOT Sleeve Ground c) XLR INPUTS Balanced Signals Pin 1 Ground Pin2 HOT Pin3 COLD Connecting Outputs Speakers can be connected using Banana plugs, Speakon plugs or bare wire to the binding posts on the rear panel of the amplifier.
Stereo Operation For stereo (dual channel) operation, set the mode select switch to the “Stereo” position. In this mode both channels operate independently of each other, with their input attenuates controlling their respective levels.
Switches and controls AC-Power-Switch-Circuit-Breaker Never try to hold the switch in the „ON“-position, if it won’t stay there by itself. The amplifier has a combined AC-switch/Circuit-Breaker on the front panel. If the switch shuts off during normal use, push back to the ON position once. If it will not stay on, the amplifier needs servicing switches and controls. Input Attenuator Whenever possible, set attenuates fully clockwise to maintain optimum system headroom.
Input Attenuates The two input attenuator controls, located at the front panel, adjust gain for their respective amplifier channels in stereo mode. With attenuate fully clockwise at 0 dB, professional power amplifiers have the rated power (when the rated input is 0,775V) In bridged mode, only channel A’s attenuate controls the power level, while channel B’s does not function.
Maintenance The Dap Audio Palladium Vintage Series requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specifications Specification 8 Ω Stereo Power (RMS) 4 Ω Stereo Power (RMS) 8 Ω Bridge Power (RMS) Frequency Response THD into 4Ω, 1 KHz SMPER IMD Slew Rate Damping Factor Input CMRR (@1Khz) Voltage Gain Input Sensitivity (@8Ω) Input Impedance Hum and Noise Crosstalk Connectors (per channel) Power Supply Max.
2003 Dap Audio.