ZA-240VTU ORDERCODE D6143 Highlite International B.V.
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio ZA-240VTU brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP Audio ZA-240VTU™ Product Guide Warning ........................................................................................................................................................................... 3 Unpacking Instructions ............................................................................................................................................. 3 Safety Instructions ..................................................................................................
Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never use anything to cover the ground contact. Never leave any cables lying around. Do not insert objects into air vents. Do not connect this system to a dimmerpack. Do not switch the system on and off in short intervals, as this would reduce the system’s life. Do not open the device and do not modify the device. Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International L N EU (including UK) From April 2004 Brown Blue Green/Yellow North America Pin Black White Green Phase Neutral Protective Earth Make sure that the device is always connected properly to earth! Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Description of the device Features The ZA-240VTU is a professional 100V 240W Zoneamp with built in tuner, USB/SD player and volume control. • • • • • • • • • • • • 4 Zones, total power 240W Inputs: 3 x Mic/Line, 2 x Line input Front line input: 3,5mm Jack Pre amp output 4/8 Ohm & 70/100 V output Bass & Treble control AM/FM Tuner USB/SD Media Player DC power input Chime Priority on input 1 Limiter protection Frontpanel Fig. 1 1.
5. Zone volume controls Allows you to adjust the volume for the corresponding zones. Pos.0: mute Pos.1: -20 dB Pos.2: -14 dB Pos.3: -11 dB Pos.4: -8 dB Pos.5: -3 dB Pos.6: 0 dB 6. Bass control Use to adjust the Bass frequencies to your preference. 7. Treble Use to adjust the treble frequencies to your preference. 8. Master Use to adjust the master volume level to your preference. 9. Mic 1 input Use to connect a microphone. 10. Mic 1 level Use to adjust the input volume level for the mic 1 (9) input. 11.
Tuner/media player Fig. 3 20. AM/FM radio selection button MP3 mode: Pushing this button allows you to enter tuner mode. Tuner mode: Pushing this button allows you to select either the AM band or the FM band. 21. USB/SD (M1) button MP3 mode: Pushing this button lets you select between USB or SD player mode. Tuner mode: Pushing this button will recall memory preset M1. 22. Rep (M2) button MP3 mode: Pushing this button lets you switch between Normal play, Repeat all and Random play.
31. SD card slot Reads SD cards with a maximum capacity of 64Gb (FAT32 format). The SD card slot reads MP-3 format only. 32. (M4) button MP3 mode: Pushing this button will start playback. Pushing the button again will pause playback. Tuner mode: Pushing this button will recall memory preset M4. 33. (M5) button MP3 mode: Push this button to stop playback. Tuner mode: Pushing this button will recall memory preset M5. Pushing and holding this button for 3 seconds, turns the tuner/media player on or off. 34.
39. Zone output terminals Each zone has it’s own output terminal. Each zone can be activated or deactivated by pushing the corresponding zone (4) buttons. Connect this terminal to the + terminal of your your high impedance (100V) speaker. The total power rating of the high impedance speakers connected to all zones summed together, should never exceed 240W. 40. FM Antenna connector Connect your FM antenna to this connector. 41. AM Antenna connector Connect your AM antenna to this connector. 42.
Operation Installation Remove all packing materials from the ZA-240VTU. Check that all foam and plastic padding is removed. Secure the equipment into a 19" rack if preferred. Connect all cables. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa. Before powering up the first time, make sure the AC-selector switch is set to the proper voltage.
Operating the USB/SD Player Switching between radio and MP3 playback Insert a USB stick or a SD stick and push the MP3 (27) button. Now the display will search for an inserted USB stick or SD card. The display will briefly show USB if a USB stick is inserted and then proceed in playback mode. During playback the display will show the current track as shown below. If a SD card is inserted, the display will show SD instead of USB. Starting Playback 1. Push the stick. 2.
Repeat/ Random play Push the rep (22) button once to repeat the current track. Push the rep (22) button again to repeat the whole disc. Push the rep (22) button again to start random play. Push the rep (22) button a fourth time, to exit the Repeat/ Random Mode. Switching between USB and SD playback Make sure that an USB stick as well as a SD-card are inserted. If you are in USB mode, push the USB/SD (21) button.
Connecting Outputs. Speakers are connected using terminal connectors. See the examples below and following page. Low impedance outputs You can use as many speakers as you want as long as the total impedance matches the amplifiers output. Example 1: using the 4Ω output with two 8Ω speakers. Fig. 5 Example 2: using the 4Ω output with four 4Ω speakers Fig. 6 Example 3: using the 8Ω output with two 4Ω speakers. Fig.
Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
Maintenance The DAP Audio ZA-240VTU requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specifications Output Power: Power outputs: Aux output: Input 1: Input 2: Input 3: Input 4: Input 5: Tuner Presets: Media player: Media player EQ: Indication LEDs: Tone control: Chime: Priority: Main power supply: Fuse: Back-up power supply: Power consumption: Power connection: Dimensions: Weight: Accessories: 240 W (1 kHz) 4Ohm, 8 Ohm, 70V, 100V (terminal strip) RCA Microphone (6.3mm Jack) Microphone (XLR) Microphone (XLR) Line (RCA) Line (Back, RCA / Front 3.
2013 Dap Audio.
