User Manual

20
_MAN40-A (CMU040-A3)
=== IMPORTANT ===
The recharging must be done when the battery is at a temperature
between 5°C (44°F) and 45°C (113°F) to preserve the battery
integrity. The Battery Status Indicator goes yellow if the battery is too
hot or cold to be charged and the charging system is disabled.
From The
LEMO
Connector
The installation requires the modular charger and the communication cable
from the LEMO Connector Charging Kit (part number ASCE800 or
ASCE802).
Insert the round connector of the modular charger into the round connector of
the small cable attached to the communication cable’s 9-pin connector
(Figure 4). Connect the modular charger to the wall outlet.
Note: Do not twist the LEMO connector when inserting or
removing the cable
FIGURE 3
CHARGING FROM THE COMMUNICATION CABLE
Communication connector
Round connector
(Insert and tighten)
Align red dots then insert
connector