User Manual

23
_MAN40-A (CMU040-A3)
Touch Screen
Calibration
You might have to calibrate the touch screen when you receive a new unit or
after you have stored the unit for a long period of time without recharging. In
this case, the display of the Figure 6 will appear.
Calibration is simply done by touching the center of the cross a couple of
seconds. When the cross moves to another place repeat the operation.
FIGURE 5
CALIBRATION OF THE TOUCH SCREEN
Starting
Display
If the unit is new and no software has been loaded yet, the screen you see
should look a bit as the one in Figure 7 otherwise the main display can be
different.
Activate DapShell by pressing the
(Folder key)
FIGURE 6
EXAMPLE OF A STARTING DISPLAY
Hold your pen until
the cross moves.