User Manual

_MAN40-A (CMU040-A3)

USE OF PC CARDS

PC Card sockets are located inside the Expansion Bay. To insert, remove or

swap a PC Card, follow the steps described below.

NOTE: It is preferable to insert, remove or replace a PC Card

in a clean and dry area. Make sure that no water or dust

will enter the CE8000 Series unit

PC-CARD AND EXPANSION BAY

1. Turn off the unit.

2. Using a small flat blade screw driver remove the Expansion Bay cover by

loosening the four screws located on the back of the unit, about two turns

to the left (counter-clockwise).

Four screws to be

removed from the

expansion cover to

access the

PCMCIA Socket