SDS

SDS Number: 00030202001 Revision Date: 12/14/2018
SAP Number:
INCOMPATIBILITY: Open flames, hot surfaces and sources of ignition. Keep away from strong oxidizing agents, heat and open
flames. Exothermic reaction with strong acids. Strong oxidizers, alkali metals and alkaline earth metals may cause fires or
explosions.
HAZARDOUS DECOMPOSITION PRODUCTS: Normal decomposition products, i.e., COx, NOx.
11. Toxicological Information
EFFECT OF OVEREXPOSURE - INHALATION: Inhalation of vapors may cause irritation of the nose, throat, lungs and respiratory
tract. Inhalation of vapors in high concentration may cause shortness of breath (lung edema). Intentional misuse by deliberately
concentrating and inhaling the contents may be harmful or fatal. Prolonged, repeated or high exposures may cause central nervous
system depression leading to headaches, nausea, drowsiness, dizziness, and possibly narcosis. In extreme cases, may cause loss
of consciousness.
EFFECT OF OVEREXPOSURE - SKIN CONTACT: Harmful if absorbed through the skin. May cause skin irritation. Prolonged and
repeated skin contact may cause dermatitis, drying and defatting due to the solvent properties.
EFFECT OF OVEREXPOSURE - EYE CONTACT: May cause eye irritation. Signs and symptoms may include: pain, tears, swelling,
redness and blurred vision.
EFFECT OF OVEREXPOSURE - INGESTION: Harmful or fatal if swallowed. May cause gastrointestinal disturbances with dizziness
and central nervous system depression. If ingested, may cause depressed respiration. Ingestion may cause gastrointestinal
irritation, nausea, vomiting and diarrhea. Aspiration hazard if swallowed. Aspiration of material into the lungs due to vomiting can
cause chemical pneumonitis, which can be fatal.
CARCINOGENICITY: No Information
EFFECT OF OVEREXPOSURE - CHRONIC HAZARDS: Repeated or prolonged exposure may cause skin, respiratory, kidney and
liver damage. May cause kidney and liver damage as well as developmental and reproductive toxicity. Prolonged or repeated
inhalation of solvent vapors may cause irregular heartbeat. NOTICE: Reports have associated repeated and prolonged occupational
overexposure to solvents with permanent brain and nervous system damage. Symptoms include: loss of memory, loss of intellectual
ability and loss of coordination. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Overexposure or misuse of toluene can cause liver, kidney, and brain damage as well as cardiac abnormalities. There have been
cases of aplastic anemia from toluene in industrial exposures (ACGIH, 1992). Increased coagulation time and reduced clotting factors
have also been found, which are indicators of damage to the bone marrow (Clayton & Clayton, 1994). Symptoms include: loss of
memory, loss of intellectual ability and loss of coordination.
PRIMARY ROUTE(S) OF ENTRY: Skin Contact, Skin Absorption, Inhalation
Acute Toxicity Values
The acute effects of this product have not been tested. Data on individual components are tabulated below
CAS-No. Chemical Name Oral LD50 Dermal LD50 Vapor LC50
108-88-3 Toluene 2600 mg/kg Rat 12000 mg/kg Rabbit 12.5 mg/L Rat
67-64-1 Acetone 5250 mg/kg mouse >15688 mg/kg rabbit 50 mg/L Rat
68410-97-9 Distillates (petroleum), light distillate
hydrotreating process, low-boiling
4800 mg/kg Rat 1900 mg/kg Rabbit > 4.96 mg/L Rat
9010-98-4 Polychlorinated Rubber >5000 mg/kg Rat N.I. N.I.
N.I. = No Information
12. Ecological Information
ECOLOGICAL INFORMATION: Ecological injuries are not known or expected under normal use.
13. Disposal Information
DISPOSAL INFORMATION: Residues and spilled material are hazardous waste due to ignitability. Dispose of material in
accordance with all federal, state and local regulations. State and Local regulations/restrictions are complex and may differ from
Federal regulations. Responsibility for proper waste disposal is with the owner of the waste. Liquids cannot be disposed of in a
landfill. Do not flush into surface water or sanitary sewer system. Do not empty into drains. Do not re-use empty containers. The
container for this product can present explosion or fire hazards, even when emptied. To avoid risk of injury, do not cut, puncture, or
weld on or near this container.
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: NOTE: Review fire hazards before proceeding with clean up.
Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak. Contain spilled material and remove with
Page 5 / 8