Use and Care Manual

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 7/20/11

DAP

All-Purpose Adhesive Sealant

• Forms a strong waterproof seal

• Aquarium safe

• Flexible seal won’t crack or shrink

• Safe for food contact

• Dishwasher & microwave safe

Packaging: 2.8 fluid ounces (82.8 mL)

Color: Clear

UPC Number: 70798 00688

Company Identification:

Manufactured for: DAP Products Inc., 2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Usage Information: Call 1-888-DAP-TIPS or visit dap.com & click on "Ask the Expert"".

Order Information: 800-327-3339

Product Description:

DAP

All-Purpose Adhesive Sealant is a one component, acetoxy cure, 100% silicone rubber sealant that is

ideal for the construction, customization and maintenance of small aquariums. It provides a waterproof and

watertight seal. It stays flexible and won’t crack or shrink. DAP

All-Purpose Adhesive Sealant is non-toxic to

fresh and saltwater fish when cured.

Suggested Uses:

Ideal for:

• Building an aquarium with a strong, waterproof bond

• Adhering plastic plants or ceramic pieces to the bottom and sides of aquarium

• Maintenance of aquarium by sealing leaks, mending cracks, patching tubing and hoses

Adheres to:

• Glass

• Ceramic

• Fiberglass

• Porcelain

• Most metals (see For Best Results section)

• Most plastics and rubbers

Performance Characteristics:

• When cured and washed, the product meets the requirements of FDA Regulation No. 21 CFR 177.2600.

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 7/20/11 DAP® All-Purpose Adhesive Sealant • • • • • Forms a strong waterproof seal Aquarium safe Flexible seal won’t crack or shrink Safe for food contact Dishwasher & microwave safe Packaging: Color: UPC Number: 2.8 fluid ounces (82.8 mL) Clear 70798 00688 Company Identification: Manufactured for: Usage Information: Order Information: DAP Products Inc.
PAGE 2
Surface Preparation & Application: 1. Remove old caulk from surface. Prepare a clean, dry surface which is free of loose debris, dust, dirt, soap, oil or grease. 2. Remove cap and puncture inner seal with other side of cap. 3. Screw on nozzle. 4. Cut nozzle at 45° angle to desired bead size. 5. Apply sealant to surface, pushing sealant ahead of the nozzle. 6. Apply 1/4" bead of sealant to edge of glass. The bead must cover the thickness of glass edge. 7. Set glass to base and repeat procedure on all sides.
PAGE 3
Shelf Life: Coverage: MSDS No: 18 months 2.8 Fl. Oz.: 15 ft. at 3/16" bead size 000 00688 004 Clean Up: Remove excess uncured sealant from surfaces and tools with mineral spirits. Do not use mineral spirit to clean skin. Wash hands with soap and water. Cured sealant must be cut or scraped away. Safety: See product label and Material Safety Data Sheet (MSDS) for safety information. You can request an MSDS by visiting our website at dap.com or by calling 888-DAP-TIPS.