MSDS

ManualsBrandsDAP ManualsPaintSilicone Max 10.1 oz. Clear 100% Premium All-Purpose Silicone Sealant

SAFETY DATA SHEET

XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR

Version

1. 1

Revision Date:

12/05/2014

MSDS Number:

643740-00002

Date of last issue: 10/17/2014

Date of first issue: 10/17/2014

1 / 18

SECTION 1. IDENTIFICATION

Product name

: XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR

000000000004098951

Product code

: DCC000011992

Manufacturer or supplier's details

Company name of supplier

: Dow Corning Corporation

Address

: South Saginaw Road

Midland Michigan 48686

Telephone

: (989) 496-6000

Emergency telephone

: 24 Hour Emergency Telephone : (989) 496-5900

CHEMTREC : (800) 424-9300

Recommended use of the chemical and restrictions on use

Recommended use

: Adhesive, binding agents

SECTION 2. HAZARDS IDENTIFICATION

GHS Classification

Eye irritation

: Category 2A

Skin sensitization

: Category 1

Specific target organ

systemic toxicity - repeated

exposure (Oral)

: Category 2 (Blood)

GHS Label element

Hazard pictograms

Signal Word

: Warning

Hazard Statements

: H317 May cause an allergic skin reaction.

H319 Causes serious eye irritation.

H373 May cause damage to organs (Blood) through prolonged

or repeated exposure if swallowed.

Precautionary Statements

Prevention:

P260 Do not breathe dust/ fume/ gas/ mist/ vapors/ spray.

P264 Wash skin thoroughly after handling.

Summary of content (18 pages)

PAGE 1
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 SECTION 1.
PAGE 2
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear eye protection/ face protection. P280 Wear protective gloves. Response: P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
PAGE 3
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. In case of eye contact : In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lens, if worn. Get medical attention.
PAGE 4
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures : Use personal protective equipment. Follow safe handling advice and personal protective equipment recommendations. Environmental precautions : Discharge into the environment must be avoided.
PAGE 5
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Ingredients with workplace control parameters Ingredients CAS-No.
PAGE 6
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 circumstance where air purifying respirators may not provide adequate protection. Hand protection Material Remarks : Impervious gloves : Choose gloves to protect hands against chemicals depending on the concentration specific to place of work. Breakthrough time is not determined for the product.
PAGE 7
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 Flammability (solid, gas) : Not classified as a flammability hazard Upper explosion limit : No data available Lower explosion limit : No data available Vapor pressure : Not applicable Relative vapor density : No data available Relative density : 1.
PAGE 8
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 Thermal decomposition MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 : Formaldehyde SECTION 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Skin contact Ingestion Eye contact Acute toxicity Not classified based on available information.
PAGE 9
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 Assessment: The substance or mixture has no acute dermal toxicity Remarks: Based on test data N-(3-(Trimethoxysilyl)propyl)ethylenediamine: Acute oral toxicity : LD50 (Rat): 2,295 mg/kg Remarks: Based on test data Acute inhalation toxicity : LC50 (Rat): > 1.
PAGE 10
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1.
PAGE 11
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 Remarks: Causes sensitization. Based on data from similar materials Germ cell mutagenicity Not classified based on available information. Ingredients: Silicon dioxide: Genotoxicity in vitro : Result: negative Remarks: Information taken from reference works and the literature.
PAGE 12
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 Reproductive toxicity Not classified based on available information.
PAGE 13
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 Assessment: Shown to produce significant health effects in animals at concentrations of >10 to 100 mg/kg bw. N-(3-(Trimethoxysilyl)propyl)ethylenediamine: Routes of exposure: Ingestion Assessment: No significant health effects observed in animals at concentrations of 100 mg/kg bw or less.
PAGE 14
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 SECTION 12.
PAGE 15
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 Persistence and degradability Ingredients: Methyltri(ethylmethylketoxime)silane: Biodegradability : Result: Not readily biodegradable. Biodegradation: 14.
PAGE 16
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 dling site for recycling or disposal. SECTION 14.
PAGE 17
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1.
PAGE 18
SAFETY DATA SHEET XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR Version 1. 1 Revision Date: 12/05/2014 MSDS Number: 643740-00002 Date of last issue: 10/17/2014 Date of first issue: 10/17/2014 SECTION 16. OTHER INFORMATION Further information NFPA: HMIS III: Flammability Health 2 0 Instability 1 HEALTH 2* FLAMMABILITY 1 PHYSICAL HAZARD 0 0 = not significant, 1 =Slight, 2 = Moderate, 3 = High 4 = Extreme, * = Chronic Special hazard.