MSDS

SAFETY DATA SHEET
XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR
Version
1. 1
Revision Date:
12/05/2014
MSDS Number:
643740-00002
Date of last issue: 10/17/2014
Date of first issue: 10/17/2014
3 / 18
Get medical attention.
Wash clothing before reuse.
Thoroughly clean shoes before reuse.
In case of eye contact : In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes.
If easy to do, remove contact lens, if worn.
Get medical attention.
If swallowed : If swallowed, DO NOT induce vomiting.
Get medical attention if symptoms occur.
Rinse mouth thoroughly with water.
Most important symptoms
and effects, both acute and
delayed
: May cause an allergic skin reaction.
Causes serious eye irritation.
May cause damage to organs through prolonged or repeated
exposure if swallowed.
Protection of first-aiders : First Aid responders should pay attention to self-protection,
and use the recommended personal protective equipment
when the potential for exposure exists.
Notes to physician : Treat symptomatically and supportively.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media : Water spray
Alcohol-resistant foam
Dry chemical
Carbon dioxide (CO2)
Unsuitable extinguishing
media
: None known.
Specific hazards during fire
fighting
: Exposure to combustion products may be a hazard to health.
Hazardous combustion prod-
ucts
: Carbon oxides
Silicon oxides
Formaldehyde
Nitrogen oxides (NOx)
Specific extinguishing meth-
ods
: Use extinguishing measures that are appropriate to local cir-
cumstances and the surrounding environment.
Use water spray to cool unopened containers.
Remove undamaged containers from fire area if it is safe to do
so.
Evacuate area.
Special protective equipment
for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
Use personal protective equipment.