MSDS

SAFETY DATA SHEET
XIAMETER(R) SLT-7000 SEALANT OXIME CLEAR
Version
1. 1
Revision Date:
12/05/2014
MSDS Number:
643740-00002
Date of last issue: 10/17/2014
Date of first issue: 10/17/2014
6 / 18
circumstance where air purifying respirators may not provide
adequate protection.
Hand protection
Material : Impervious gloves
Remarks : Choose gloves to protect hands against chemicals depending
on the concentration specific to place of work. Breakthrough
time is not determined for the product. Change gloves often!
For special applications, we recommend clarifying the
resistance to chemicals of the aforementioned protective
gloves with the glove manufacturer. Wash hands before
breaks and at the end of workday.
Eye protection : Wear the following personal protective equipment:
Safety goggles
Skin and body protection : Select appropriate protective clothing based on chemical
resistance data and an assessment of the local exposure
potential.
Skin contact must be avoided by using impervious protective
clothing (gloves, aprons, boots, etc).
Hygiene measures : Ensure that eye flushing systems and safety showers are
located close to the working place.
When using do not eat, drink or smoke.
Wash contaminated clothing before re-use.
These precautions are for room temperature handling. Use at
elevated temperature or aerosol/spray applications may re-
quire added precautions.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : paste
Color : colorless
Odor : slight
Odor Threshold : No data available
pH : Not applicable
Melting point/freezing point : No data available
Initial boiling point and boiling
range
: Not applicable
Flash point : Not applicable
Evaporation rate : Not applicable