FAQ

8. Can you apply spackling behind the patch to help improve strength/structural integrity?
Yes, you can apply spackling or drywall mud behind the patch prior to adhering the patch to provide
additional support to your repair. You do not need to wait for the compound to dry prior to applying the patch,
however, ensure the surrounding drywall is clean and free of material prior to applying the patch to ensure
proper adhesion.
9. Can I sand the patch down using sandpaper?
Sanding the patch down using sandpaper is not recommended and may not provide acceptable finished
results. We do recommend sanding the drywall prior to applying the patch to de-gloss the surface to promote
and increase adhesion.
10. Is the patch waterproof? Can I use it on wet or damp drywall such as leaks?
For best results, we recommend using DAP Eclipse on dry drywall. If you happen to have damp or wet
drywall, we recommend completing a full drywall replacement to ensure no mold or mildew starts to grow.
11. Can the patch be cut, trimmed and customized to different shapes or sizes?
Yes, the patch can be cut and customized to different shapes and sizes to fit certain applications such as
corners, along trim and molding or for outlet applications. However, cutting the patches outer edges to fit a
smaller size repair is not recommended as you will lose the feathered edge and gradient which will effect the
overall appearance.
12. Can I nail or screw back into the patch to rehang a picture of other object on the wall?
Yes, you can nail or screw back into the patch as long as there is drywall directly behind the patch where the
nail or screw is placed.
13. Can this product be used for walls and ceiling damage?
Yes, this product is perfect for repairing damage in drywall walls and ceilings.
14. Can I apply patches on top of one another to help cover a larger repair?
We do not recommend applying patches on top of one another to help cover a larger area of damage. For
best results, use the recommended patch damage guidelines and choose the patch size that is sufficient for
your repair. If your damage exceed 3” in diameter, you may want to utilize a different repair method.
15. Can I repair a textured wall or ceiling using DAP Eclipse Rapid Wall Repair Patches?
Yes, you can repair a textured wall using DAP Eclipse Patches. The product is compatible with aerosol spray
textures and textured rollers. If repairing textured walls or ceilings, remove the protective layer by pulling the
pop-up tab immediately after adhering the patch to the drywall (no need to apply the first coat of paint). Then
apply texture, allow to dry thoroughly, then paint.
FREQUENTLY ASKED
QUESTIONS